Dimmable LED Driver | 24V | 100W | IP67 | 0/1-10V

0/1-10V dimmable LED Driver constant Voltage 24V 100W IP67

Can be used to DIM 24 Volts LED strips using 0-10V dimmer switches/signal.

Can also be used with smart home controllers as a part of a home automation to dim LED strip Lighting or other constant voltage LED products.

This is a dual function dimmable LED driver and can be controlled with both 0-10V & 1-10V dimming systems.

Characteristics:

Dimming control: 0/1-10V

Input Voltage: 85~265V AC

Output Voltage: 24 Volts DC (PWM), 100W 4.16A

Dimensions: 233*45*33mm

IP Rating: IP67

Weight: 694g

Warranty: 5 Years

IMPORTANT NOTICE!

This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.

The table below shows the maximum LED strip length, which can be operated with this LED driver.

To consider the performance drop, which occurs in the power supply cable and the efficiency of the LED Driver, 20% was deducted from the maximum strip length in the table below.

For more information about the installation of LED Strips, you can download the PDF file in the attachments tab called: “Installation of LED Strips”.