15 meters RGBW LED Strip Kit RGB+Warm (Basic)
RGBW LED strip Kit 15 meters
RGB+Warm Quad LED chip
This is a BASIC 15 meters RGBW LED Strip kit (RGB+warm white non waterproof IP00, quad LED chip)
The Kit includes all necessary products for a quick installation of up to 15 meters of RGBW LED strip.
This is an upgradable Kit and can easily be expanded to drive up to 17 meters of RGBW LED Strip (single zone) only by purchasing additional length of RGBW LED strip (24V/14.4W)
RGBW remote control included is a multi-zone smart device able to control up to 4 independent zones/areas (additional wireless controllers are required, one per zone). Operates on high RF frequency with a reliable range of up to 30 meters apart from the controller.
The following products are included to the Kit:
1 x 300W / 24V LED Driver
Expandable: Ready to drive up to 17 meters of RGBW LED Strip
1 x Wireless RGBW LED controller (New Version)
Expandable: Ready to drive up to 20 meters of RGBW LED Strip
Specified for maximum of 30 meters of 14.4W LED strip per controller but suggested to operate with 15 to 20 meters.
1 x RGBW LED remote
Expandable for up to 4 zones (extra wireless RGBW LED controllers will be necessary)
Tape comes ready with 3M double adhesive tape on the back of the flexible PCB and with 15cm soldered wire tails at both sides of the 5m led strip length.
The LED driver is powerful, enclosed/waterproof (IP67) and fanless, perfect to be used in bedrooms or other areas that noise might be an issue.
The LED driver comes with 2 Year Guarantee and all the rest products included with this kit with 3 or 5 Years Guarantee(check specific product page for details).
Please make sure you know how to install the LED strip properly, avoiding voltage drop and high current through the flexible pcb of the LED strip (long runs could cause high current and damage the flexible pcb. If you are not sure about something please contact us before to power on the kit or use this product "Ask a question" button below.