5 meters RGBW LED Strip Kit RGB+Natural (Basic)
Kit 5 meters RGBW LED strip
RGB+Natural Quad LED chip
5 meters RGBW LED Strip kit (RGB+natural white non waterproof IP00, quad LED chip)
Kit includes all necessary products for a quick installation of up to 5 meters of RGBW LED strip.
RGBW remote control included is a multi-zone smart device able to control up to 4 independent zones/areas (additional wireless controllers are required, one per zone). Operates on high RF frequency with a reliable range of up to 30 meters apart from the controller.
The following products are included into the Kit:
1 x 100W / 24V LED Driver (IP20 Chassis mount), premium series
Can drive up to 5.5 meters of RGBW LED Strip
1 x Wireless RGBW LED controller (New Version with easy connection terminals)
Expandable: Ready to drive up to 20 meters of RGBW LED Strip
Specified for maximum of 30 meters of 14.4W LED strip per controller but suggested to operate with 15 to 20 meters.
1 x RGBW LED remote
Expandable for up to 4 zones (extra wireless RGBW LED controllers will be necessary)
Tape comes ready with 3M double adhesive tape on the back of the flexible PCB and with 15cm soldered wire tails at both sides of the 5m led strip length.
LED driver is non-waterproof (IP20) fanless chassis mount
The LED driver comes with 5 Year Guarantee and all the rest products included in this kit with 3 Years Guarantee.
Please make sure you know how to install the LED strip properly, avoiding voltage drop and high current through the flexible pcb of the LED strip (long runs could cause high current and damage the flexible pcb. If you are not sure about something please contact us before to power on the kit or use this product "Ask a question" button below.
Please download PDF user manuals and other help located at the bottom of every product page.
Those are the basic products required to install up to 5m of RGBW LED strip, additional hardware such as mains cable, plug and other standard electrical accessories will be necessary and they are not included here.