Mains Dimmable LED Driver
24V PWM Output
100 Watt / 4160mA
Non Waterproof (IP20)
Warranty: 3 Years
3 Item Items
Same Day Dispatch
Warning: Last items in stock!
|Voltage Type||Constant Voltage|
This Mains dimmable LED driver operates with leading edge phase cut dimmers and can be used to dimming 24 Volts LED strips, controlled by normal dimmer switches powered by 240V AC.
It can operate with load ranging from 50% to 100% and the dimming range will be from 5% to 100%.
It is suggested to load this driver with at least 50 Watt (maximum 100W) and use suitable leading edge dimmer with minimum rated operating wattage that matches your LED strip load.
We do offer the following wattages concerning mains dimmable LED drivers: 12W/20W/30W/60W/100W/150W/200W.
The reason that we offer a variety of wattages is because the dimmable Led drivers (mains dimmable 240V) should be matched with LED strip load and it is important for the LED strip power consumption to be between 50% to 100% of the dimmable driver capacity.
The Hi-Line mains dimmable drivers are compatible with leading edge (triac) dimmers. We have tested the Varilight V-DIM (VL11) dimmer and it shows to work smoothly (without any flickering) with our mains dimmable drivers (100W, 150W, 200W).
(We do suggest to test the dimmers on-site, as we cannot guarantee the specifications of third-party manufacturers)
Input Voltage: 240V AC – (Dimmable)
Output Voltage: 24V DC (PWM/Dimmer) 100W/4.16A
Loading ranging: Stepless from 50 to 100%.
Dimming range: Stepless from 5% to 100%.
IP Rating: IP20
Dimensions: (LxBxH): 160x100x42mm
3 Years Warranty
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
The table below shows the minimum-maximum LED strip length, which can operate with this mains dimmable LED Driver.
No customer reviews for the moment.