Red LED Strip, IP65 (splash proof)
19 Item Items
Same Day Dispatch
Warning: Last items in stock!
|LED Chip||SMD 3528|
|Number of LEDs per meter||60|
|Width of strip||8mm|
|Cutting length||Every 6 LEDs (100mm)|
|LED Strip Packing||5-meter roll|
|Voltage Type||Constant Voltage|
Red LED strip, 5 meter roll.
Can be cut every 6 LEDs (10cm). Width of the LED strip is 8mm
LED strip has 4 wires and is powered by high quality SMD3528 LED chips.
Due to the high quality of our LED strips, there is ver low decay, which increases the LED strip's lifetime and ensures that a high level of the brightness is kept constant throughout.
IP65 Waterproof Protection (IP65 = Splashproof) is achieved with polyurethane and silicon, which is the most expensive and best method that can be used on LED strips. This waterproof protection is very durable and does not become "yellowish" as can happen with most LED strips within 3 months of installation. Moreover, the LED strip remains extremely flexible, very clear, soft and well-protected throughout its lifetime and can maintain its IP65 rating for more than 5 years, if installed using an aluminium LED profile (to run at lower temperatures). Please note: IP00 rated LED strips are recommended wherever an IP65 rating is not required (e.g. in indoor spaces) as these are easier to handle and install.
The product should be connected to a constant voltage driver - 24Volts - and with any 24 Volts PWM controller (analogue or DMX Dimming) as with all conventional LED strips.
All our LED strip products come with an Original 3M adhesive tape.
All our LED strips are dimmable. Please select a suitable PWM LED dimmer/controller. The LED strip cannot be dimmed in any other way!
Please note that soldering is recommended for the connection of LED strips. However, if a solder free connection is preferred, Hi-Line’s solder free connectors offer the best solution currently available on the market.
Our price is for 1 x 5 meter roll single colour (RED) LED strip IP65 - 24 Volts
The table below shows the maximum LED strip length, which can be operated with a given LED driver.
To consider performance drop, which occurs in the power supply cable, and to maximise the efficiency of the LED Driver, 20% is deducted from the maximum strip length in the table below.
Note: LED strip dimming is possible if the driver is used in combination with an LED controller. In such cases, the LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.
No customer reviews for the moment.