24 Volts DC, Waterproof (IP65) LED strip
Powered by SMD3528 LED chip
120 LEDs/m, 9.6W/m
10mm width (3.5mm height)
5 meter roll, colour: red
40 Item Items
Same Day Dispatch
Warning: Last items in stock!
|LED Chip||SMD 3528|
|Number of LEDs per meter||120|
|Width of strip||10mm|
|Height of strip||3.5mm|
|Cutting length||Every 6 LEDs (50mm)|
|LED Strip Packing||5-meter roll|
|Voltage Type||Constant Voltage|
Commercial high grade LED Strip / Tape
5 METER WATERPROOF IP65 SMD 3528 LED STRIP LIGHT WITH 600 LEDS IN RED
Can be cut at every 6 LEDs (5cm), Width of the LED strip is 10mm.
24 Volts DC, waterproof (IP65) LED strip powered by SMD3528 LED chip, 120LEDs/m, 9.6W/m, 5 meter roll, colour: red
The quality of this product is superior!
IP65 Waterproof Protection (IP65 = Splashproof) is achieved with polyurethane and silicon, which is the most expensive and best method that can be used on LED strips. This waterproof protection is very durable and does not become "yellowish", as happens with most LED strips within 3 months of installation. Moreover, the LED strip remains extremely flexible, very clear, soft and well-protected throughout its life time and can keep its IP65 rating for more than 5 years, if installed using an aluminium LED profile (to run at lower temperatures). Please not: IP00 rated LED strips are recommended wherever an IP65 rating is not required (e.g. indoor spaces) as these are easier to handle and install.
All our LED strips are dimmable. Please select a suitable PWM LED dimmer/controller. The LED strip cannot be dimmed in any other way!Fitted with an easy to install original 3M adhesive tape with excellent adhesion (identified by a red protective strip on the adhesive side).
Please note that soldering is recommended for the connection of LED strips. However, if a solder free connection is preferred, Hi-Line’s solder free connectors offer the best solution currently available on the market.
Our price is for 1 x 5 meters roll (600 LEDS) single colour LED Strip (Red) - IP65 Waterproof
The table below shows the maximum LED strip length, which can be operated with a given LED driver.
To consider performance drop, which occurs in the power supply cable, and to consider the efficiency of the LED Driver, 20% is deducted from the maximum strip length in the table below.
Note that LED strip dimming is possible if the driver is used in combination with an LED controller. In such a case, the LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.
For more information about the installation of LED Strips, you can download the above PDF file: “Installation of LED Strips”.
No customer reviews for the moment.