LED Driver "Premium series" 100W 24V IP20
Key Features:
- 100W Premium Series LED Driver
- Output: 24V / 4.16 Amps
- 5 years Warranty
NON-Dimmable Premium series 100W 24V LED driver - 5 years Warranty
This is a highly specified switch mode power supply using the best electronic components in the market.
Non-Dimmable LED Driver suitable for LED Strips of total power consumption up to 100W.
It is recommended to calculate 20% more than the tape power consumption to cover voltage drop of the circuit.
Specification:
LED Driver 100W/24V (Non-Dimmable)
Input: 110~220V AC (50/60Hz)
Output: 24V / 4.16 Amps
Suitable for LED Strips
Rating: IP20 (Non-Waterproof)
Dimensions: 160*98*38 mm
Weight: 510g
SELV, CE & RoHS certified
Warranty offered for the LED driver is 5 years
___________________________
Note that LED strips dimming is possible if this driver is used in combination with an LED controller. In such case LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.
For driving RGB or RGBW LED Strips, you will have to combine the Driver with an RGB-RGBW LED Controller.
Alternatively you may use a mains dimmable LED driver and dim the LED strip through conventional wall mount dimmer or professional dimming power pack with 240V AC output.
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
The table below shows the maximum LED strip length, which can be operated with this LED driver.
To consider best power supply performance 20% was deducted from the maximum strip length in the table below.
For more information about the installation of LED Strips, you can download the below PDF file: “Installation of LED Strips”.
- Brand
- Hi-Line
- Power
- 100 W
- IP Rating
- IP20 (Non-waterproof)
- Type
- non-dimmable
- Voltage
- 24V DC
- Voltage Type
- Constant Voltage
- Warranty
- 5 Years