Strip to strip connector for 12mm IP65 LED tape RGBW 5 pin (pack of 5)
- IP65 RGBW LED strip to strip connector
A LED strip connector (strip to strip) designed for RGBW 12mm wide IP65 LED strips
Connect the IP65 splashproof / waterproof RGBW LED strip without removing the surface coating gel.
Assemble wires by yourself as needed, flexible for different projects, DIY customized length of wiring
With this revolutionary LED strip to power connector you can customize the required length of the cable, gauge, insulation colour and wire core type (stranded or solid), use wires of your preference per project requirements and use with IP65 RGB strips without removing gel coating.
This is a very high quality strip to wire power connector suitable only for IP65 RGBW LED strips 12mm wide.
Compatible with splashproof / waterproof 30-120 LEDs/m LED strips (IP65 RGBW 12mm).
This connector is made of flame retardant material.
Supports high current LED strips.
SIZE: L27.4mm X W17.10mm X H8mm
DC3~24V / Max. 5A
The IP65 connectors are suitable for use with the gel coated (PU) IP65 LED strips (please note that this connector is not compatible with the IP00, nano or nano PU LED strips) or any 10mm wide RGBW strips.
Note: Please DO NOT close caps of the connector before strip to be in place as it is hard to open!
- Connector type
- strip to strip connector
- Connector width
- For 12mm LED strips
- Number of terminals
- 5 pin (for RGBW strips)
- IP Rating
- IP65 (Splashproof)
- 3-24V DC