LED Driver | 100W | 24V | IP20 | constant voltage (EC Series)
- EC Series
- Warranty: 3 Year Warranty
- Output: 24V / 4.16 Amps
- IP Rating: IP20
- LED Driver
Fanless constant voltage 100W 24V LED driver IP20 - 3 years Warranty
Non-Dimmable LED Driver suitable for LED Strips of total power consumption up to 100W.
It is recommended to calculate 20% more than the tape power consumption to cover losses of the circuit and efficiency of the power supply.
Note: This is an economy series driver. If you prefer lower in-rush current and higher power factor products, then consider our premium series drivers instead. Installers should be aware of in-rush current and the type of MCB required in such cases.
To learn more about In-rush current, visit out support page HERE
LED Driver 100W/24V Suitable for LED Strips
Input: 175~264V AC (50 Hz)
Output: 24V / 4.16 Amps
Rating: IP20 (Non-Waterproof)
Warranty offered for the LED driver is 3 years
Note that LED strips dimming is possible if this driver is used in combination with an LED controller. In such case LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
For more information about the installation of LED Strips, you can download the PDF file: “Installation of LED Strips”.