- New
50m Roll RGBW LED Strip (RGB+NW) | 12V | 14.4W/m | IP00 | CRI80 | 12mm/3oz PCB
50m Roll RGBW LED Strip (RGB+NW) 12V 14.4W/m IP00 12mm CRI80 – 60 LEDs/m Quad Chip – Warranty covers only tested returned lengths. Do not light full 50m at once.
Product Reference: HL-RGBNW12-IP00-12V-50M
12V commercial high-grade RGB + Natural White LED strip in a 50m continuous roll, featuring quad chip (4 colours in 1 chip) SMD 5050 LEDs on a 3oz high copper PCB for better thermal performance and reduced voltage drop.
Key Features
Brand: Hi-Line
Brightness: 1200Lm/m
Colour: RGBW (RGB + Natural White 4000K)
LED Chip: SMD 5050 Quad Colour
LED Density: 60 LEDs/m
Cutting Length: Every 3 LEDs (50mm)
Power: 14.4W/m
IP Rating: IP00 (Non-waterproof)
Width: 12mm (3oz Double Layer PCB)
Voltage: 12V DC (Constant Voltage)
Roll Length: 50 metres
CRI: >80
CIE Colour Space: 3 SDCM
Warranty: 5 Years
Important Installation Notice
This 50m roll must never be powered all at once. This would cause permanent damage, not covered by any warranty.
For 12V installations:
5m maximum can be powered from one end only.
For up to 10m, you must power both ends in parallel using 5-core cabling back to your controller to manage voltage drop.
If you don’t specifically require 12V (e.g. battery systems or shorter 50mm cut points), we recommend the 24V version of this LED strip.
24V allows longer runs, less cabling, and better efficiency, making it ideal for larger or fixed installations.
Warranty Terms for 50m Rolls
Warranty applies only to the lengths returned to us for testing and confirmed as faulty.
Uncut, unused 50m rolls can be returned fully if faulty.
Once cut or partially used, only the specific returned lengths will be replaced if found faulty.
Damage caused by incorrect powering (e.g. lighting 50m at once) is not covered.
Compatibility and Control
Compatible with common anode RGBW controllers.
All Hi-Line LED strips are dimmable when used with a suitable PWM RGBW LED controller.
Soldering & Accessories
Pre-soldered with 15cm tails on both ends for convenience. Soldering is recommended for long-term reliability, but solder-free connectors are available in the Related Products tab.
Please note: Connectors are non-returnable as per our terms.
Looking for Related Products or Accessories?
Click the 'Related Products' tab below this description to find compatible drivers, connectors, and accessories. For installation guides, check the 'Attachments' tab.
- Brand
- Hi-Line
- Brightness
- 1200 Lm/m
- CIE Colour Space
- 3 SDCM
- Colour
- RGBW (RGB+NW)
- Colour rendering (CRI in ra)
- 80
- Colour Temperature (CCT)
- RGB+4000K
- Cutting length
- Every 3 LEDs (50mm)
- FCP copper content
- 3 ounce double layer
- LEDs per meter
- 60 (SMD)
- LED Chip
- SMD 5050 (Quad colour)
- LED Strip Length
- 50 metres roll
- Power
- 14.4 Watts per Metre
- IP Rating
- IP00 (Non-waterproof)
- Voltage
- 12V DC
- Voltage Type
- Constant Voltage
- Warranty
- 5 Years
- Width of strip
- 12mm