IP67 surface mount LED profile extrusion with milky casing 2m length (17x17mm)
IP67/68 waterproof surface mount LED strip profile
Milky case/diffuser
Surface mounting
Ideal for 120 LEDs and above
For LED strips up to 12mm wide
Size: L2000*W17*H17mm
IP67/68 waterproof surface mount LED profile extrusion with milky casing 2m length (17x17mm)
Included in the Kit:
1 x 2m LED strip mounting aluminium rail
1 x Milky case (2m diffuser)
2 x end caps
Please purchase mounting clips separately (check below for matching clips and other accessories for this product).
To maintain IP67 or 68 rating during installation additional sealing will be required, please consult with your installer.
This profile is perfect if trying to achieve a spotless effect with LED strips at 120 LEDs per metre. At 60 LEDs per metre, spotting is visible but minimal compared to other standard LED profiles. Please see photos for examples.
Size: L2000*W17*H17mm
Strips: Fits up to 12mm wide LED strips, suggested for up to 20 w/m LED strips.
Please note: 10mm wide is a more comfortable fit. If using 12mm wide strips (IP00 or IP65), you must ensure that the strip is laid perfectly centred along the aluminium flat bar, otherwise you may find issues with inserting the bar due to the tight fit. These have been thoroughly tested and will be fine if you adhere to this rule.
Beam Angle: 120 degrees
Installation method: Wall - surface mounting
IP Rating: IP67 (IP68 if sealed properly)
Cuttable: Hacksaw
Optional accessories: Mounting clips (Reference: HL-CLSS-001)
Material: Aluminium with PMMA diffuser
Warranty: 3 years