- New
26mm Curved Handrail LED Spot 24V RGB IP67
The stainless face is curved so the fitting sits flush on a round handrail. 26 mm cut-out, 24 V analogue RGB, IP67, 1 W. Use a 24 V 3-channel PWM RGB controller. Sold as a single fitting.
HL-HR26-24V-RGB-IP67 — 26 mm curved handrail LED spot, 24 V analogue RGB, IP67
The face is curved to match a round handrail or balustrade tube. A flat-face spot would sit proud of the rail and leave a gap; this shape is made so the fitting sits flush on the tube.
Stainless recessed spot. 32 mm face, about 30 mm deep, 26–27 mm hole. 1 W, 24 V DC, analogue RGB. IP67 when installed correctly. Four-core flying lead, about 480 mm.
Constant-voltage 24 V. Drive it from a 24 V 3-channel PWM RGB controller (common-anode). Not 230 V. Not a pixel / SPI fitting — there is no data wire. Not for continuous underwater use — IP67 is rain and short immersion.
- Curved face for a flush fit on round handrail tube
- Face 32 mm, depth about 30 mm, hole 26–27 mm
- 1 W, 24 V DC, analogue RGB, 45° beam
- IP67, 304 stainless, spring clips
- Four-core lead
- Warranty: 5 years
Must be installed by a qualified electrician. Confirm the four-core colours against your controller before first power-up. The warm-white 3000K sister of this fitting is listed separately.
- Brand
- Hi-Line
- Colour
- RGB
- IP Rating
- IP67 (Waterproof)
- Voltage
- 24V DC
- Voltage Type
- Constant Voltage (PWM)
- Warranty
- 5 Years