LED-Driver 200W Premium Series 24V IP67 Constant Voltage
Premium Series LED Driver 200W
Suitable for LED Strips
Input: 175-264V AC
Constant Voltage Type
5 years Warranty
Premium Series of constant voltage LED drivers with high power factor & efficiency.
This is a highly specified switch mode power supply using the best electronic components in the market.
Non-dimmable LED Driver suitable for LED Strips of total power consumption up to 200W.
It is recommended to calculate 20% more than the tape power consumption.
LED Driver 200W/24V Suitable for LED Strips
Input: 175~264V AC (50Hz)
Output: 24V / 8.33 Amps
Rating: IP67 (Waterproof)
Power factor: >0.95
Dimensions: L220*W67*H22.8 mm
SELV, CE & RoHS certified
Warranty offered for the LED driver is 5 years
Note that LED strips dimming is possible if this driver is used in combination with an LED controller. In such case LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.
For driving RGB or RGBW LED Strips, you will have to combine the Driver with an RGB-RGBW LED Controller.
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
The table below shows the maximum LED strip length, which can be operated with this LED driver.
To consider the best performance for the power supply, 20% was deducted from the maximum strip length in the table below.
For more information about the installation of LED Strips, you can download PDF file: “Installation of LED Strips”.