COB RGBW LED Strip 10m Roll 24V – 896 LEDs/m – RGB + 2700K – CRI 90+ – IP20
Professional high-density COB RGBW LED strip supplied as a continuous 10 metre roll, combining full RGB colour control with a dedicated 2700K warm white channel on a single 12mm PCB. Designed for longer linear installations where reduced joins and uninterrupted light lines are preferred.
With 896 LEDs per metre, this strip produces a completely smooth, dotless lighting effect with uniform colour blending and no visible spotting. The integrated warm white channel delivers natural illumination with CRI 90+ performance, while the RGB channels allow full dynamic colour scene control.
Operating at 15 Watts per metre on 24V DC constant voltage, the strip offers stable performance and improved voltage behaviour compared to lower voltage systems.
Supplied as a 10 metre roll.
Cuttable every 62.5mm for precise length adjustment.
Each roll is supplied with factory pre-soldered tails at both ends, enabling parallel power injection from either side. When cut, both resulting lengths retain a pre-fitted tail, simplifying installation and reducing on-site soldering.
Recommended power injection every 5 metres.
For optimal performance, 10 metre installations should be powered from both ends in parallel to minimise voltage drop. Total system load and cable sizing must be calculated correctly prior to installation.
For smaller applications, this same specification is also available as a 5 metre roll. Please refer to the “Related Products” tab or use the “Refine By” filter to select alternative lengths.
Warranty
Standard Warranty: 3 Years.
Extended Warranty: Any coverage beyond 3 years is considered Extended Warranty and is only valid with an official Hi-Line certificate. Extended cover is a paid upgrade and is granted only after Hi-Line engineers have reviewed the full technical design, installation method and operating environment. In selected approved projects, warranty cover may be extended up to 7 Years.
Compatible drivers and controllers
Please check the “Related Products” tab for suitable 24V LED drivers, RGBW controllers, remotes and accessories. Technical data sheets and installation guides are available in the “Attachment” tab.
Technical Specifications
Brand: Hi-Line
Colour: RGBW (RGB + Warm White)
Colour Temperature (CCT): RGB + 2700K
Colour Rendering Index (CRI): Ra > 90
LED Type: COB (Chip on Board)
LED Density: 896 LEDs per metre
Power: 15 Watts per metre
Voltage: 24V DC constant voltage
IP Rating: IP00 / IP20 (non-waterproof)
Strip Length: 10 metre roll
Cutting Interval: 62.5mm
Recommended Power Injection: Every 5 metres
Width: 12mm
