Strip to strip connector for high density 10mm IP00 single colour LED strips
2 pin LED strip to strip connector
To be used with high density LED strips only
Supports high current LED strips
For 10mm IP00/IP20 single colour LED strips 180-240 LEDs/m
A LED strip connector (strip to strip) designed for 10mm wide IP00/IP20 non-waterproof high density single colour LED strips
This is a very high quality strip to strip connector suitable only for IP00/IP20 single colour 10mm wide high density LED strips.
Compatible with 180-240 LEDs/m LED strips (10mm single colour). This connector is made of flame retardant material.
Supports high current high density LED strips!
Please note that this connector is not compatible with the gel coated (PU) IP65 LED strips.
Note: Please DO NOT close caps of the connector before strip to be in place as it is hard to open!
Size: L25mm X W14.6mm X H7.7mm
Colour: Transparent with black base
Number of Pin: 2
Pin Pitch: 7.6mm
Connection hardware: High precision brass(Cu)
Voltage range: DC 3-24V
Maximum current: 5A
Min.LED Strip Thickness: >0.2mm
Normal working temperature: ≦60°C
Working Temperature: -20°~+40°C
Rated Standard: IEC/EN 60664-1
Shell material: Polycarbonate
Flame Retardant: UL94v-0
Pin Surface Treatment: Tin-plating
- 12-24V DC
- IP00 (Non-waterproof)
- Connector type
- strip to strip connector
- Connector width
- For 10mm High Density LED strips
- Number of terminals
- 2 pin (for single colour strips)