- New
IP68 L-shape corner connector for 10mm LED tape single colour
One 2-pin L connector for a 10 mm IP68 single-colour LED strip. It joins two cut ends at a right angle. The board inside the sleeve is 8 mm. Sold as one piece.
This L connector joins two cut ends of a 10 mm IP68 single-colour LED strip at a right angle.
It is IP68. It fits the same gel-coated strips as the 200 mm power lead HL-SC-B10-IP68-200. The board inside the sleeve is 8 mm. The outside of the sleeve is 10 mm. It also fits Hi-Line's 10 mm IP68 COB strips of that size.
It has two pins, for a single-colour strip. It follows the strip supply, from 3 V to 24 V DC. There is no lead on this part. The two ends of the strip push into the clear housing.
It is for gel-coated IP68 strip. It does not fit IP00, IP20, IP54, IP65 or IP67 strip.
Sold as one piece. Five-year warranty.
- Brand
- Hi-Line
- Connector type
- L Shape - Corner
- Connector width
- For 10mm COB Strips
For 10mm SMD strips - Number of terminals
- 2 pin (single colour strips)
- IP Rating
- IP68 (Waterproof)
- Voltage
- 3-24V DC
- Warranty
- 5 Years
- Width of PCB
- 8mm
- Width of strip
- 10mm