This 12V addressable RGB LED pixel module set includes 50 individually controlled lighting nodes, each powered by a WS2811 chip. Designed for signage, creative installations, and outdoor decorative projects, these modules offer vibrant colour mixing with dynamic control.
Each pixel module features a 12mm body and comes prewired with 100mm tails between each unit. Using the standard WS2811 protocol, you can assign unique effects to every pixel. The module is built for easy mounting into pre-drilled 12mm holes and connects using a 3-pin JST SM connector.
Built to operate from a 12V DC input, each module includes onboard regulation circuitry and a single RGB LED, enabling consistent brightness and stability without the need for external resistors. The total power consumption is approximately 15W per 50-pixel string.
Compatible with SPI-based LED controllers, including Hi-Line’s DMX512 to SPI decoder (Ref: HL-DS-L), this module string can be integrated into both standalone and professional DMX systems. The setup supports up to 682 pixels per controller output (based on 2048 DMX channels), with power supplied externally according to system layout.
Whether you're designing channel letters, message boards, or animated displays, these modules are a dependable, customisable solution ready for indoor or outdoor use.
Installation Notes:
Drill 12mm holes in your chosen surface and press-fit the modules in place. Connect power and signal lines via the pre-attached 3-pin JST connector (Red = 12V, Green = Data, White = GND). Waterproof connections must be ensured using sealed joiners or enclosures for outdoor installations.
Looking for Related Products or Accessories?
Discover compatible products and accessories by clicking the "Related Products" tab at the top of this product description on desktop, or just after this section on mobile devices. For detailed specifications, the "Product Specification" tab is also available at the top of this description, offering immediate access to important product details. If you need technical data or installation guides, the "Attachments" tab is located in the same area. To refine your search within any product category, the "REFINE BY" filter system is positioned on the left side of the screen on desktops and at the top of the page on mobiles, ensuring a seamless browsing experience.
Technical Specifications:
Input Voltage: 12V DC
Power Consumption: 0.3W per pixel
Working Current: approx. 25mA per pixel
Pixel Count: 50 pixels per string
LED Type: RGB (WS2811 IC, addressable)
Diameter: 12mm (body)
Distance Between Pixels: 80mm
Wire Length: 100mm
Waterproof Rating: IP65
Connector Type: 3-pin JST SM
Operating Mode: Digital control (SPI protocol, compatible with HL-DS-L)
Mounting: Push-fit into 12mm drilled holes
Material: Durable polycarbonate casing
Certifications: UKCA & CE
Warranty: 3 years standard, extendable to 5 years with our extended warranty option
