Mains Dimmable LED Driver 24V 75W Constant Voltage (TE-75-24)

Professional 24V constant voltage LED driver with a maximum output of 75W. Supports both leading-edge (Triac) and trailing-edge (ELV) dimming, as well as AC Push-Dim control. Ideal for powering single colour LED strips and other constant voltage 24V lighting products in residential, commercial, or custom installations.

With a high-frequency PWM dimming output of 2000Hz, the driver ensures flicker-free operation and stable light output across the full brightness range. Built-in protection against overload, short circuit, and over-temperature guarantees safe and reliable performance with automatic recovery.

Compatible with widely used wall dimmers such as Lutron, Clipsal, and Dynalite. The fully enclosed plastic housing is IP20 rated for indoor use and designed for long-lasting operation.

AC Push-Dim Function
This feature allows dimming using a simple, non-latching wall switch.
A short press switches the light on or off.
A long press (1 to 6 seconds) adjusts brightness. Each long press reverses the dimming direction.
The last brightness level is remembered, even after a power cut.
For multi-driver setups, holding the switch for more than 10 seconds synchronises all connected drivers. No additional sync wiring is required.
Recommended limit: up to 25 drivers per switch, with push wire length not exceeding 20 metres.

Technical Specifications

Input Voltage: 200–240V AC, 50/60Hz
Input Current: Max. 0.75A at 230V
Output Voltage: 24V DC constant
Max. Output Current: 3.125A
Max. Output Power: 75W
Dimming Method: Leading-edge (Triac) / Trailing-edge (ELV) / AC Push-Dim
PWM Frequency: 2000Hz
Efficiency: 87% @ 230V AC
Standby Power Consumption: <1W
Short Circuit Protection: Yes (auto-recovery)
Overload Protection: Yes, triggers at 120–150% load (auto-recovery)
Over-Temperature Protection: Yes, intelligent adjustment above 100°C PCB temperature
Operating Temperature: -20°C to +50°C
Max. Case Temperature (Tc): 80°C
Storage Temperature: -40°C to +80°C
Humidity (Operating): 20% to 90%, non-condensing
Temperature Coefficient: ±0.03% / °C
Vibration Resistance: 10–500Hz, 2G, 6 min/cycle on X, Y, Z axes
IP Rating: IP20 (Indoor use only)
Dimensions: 179 × 56 × 30 mm
Terminals: Screw terminals for 0.5–1.5mm² cables
Housing: Fully insulated plastic
Mounting: Built-in mounting flanges
Certifications: UKCA, CE
Compliance Standards: EN61347-1, EN61347-2-13, EN61000-3-2 Class C, EN61547, EN61000-4-2,3,4,5,6,8,11

Application
Suitable for indoor lighting in homes, offices, hotels, retail spaces, and LED-based signage. Designed for both retrofit and new installations.

Warranty: 3 years standard, extendable to 5 years with our extended warranty option.

Looking for Related Products or Accessories? Discover compatible products and accessories by clicking the "Related Products" tab at the top of this product description on desktop, or just after this section on mobile devices. For detailed specifications, the "Product Specification" tab is also available at the top of this description, offering immediate access to important product details. If you need technical data or installation guides, the "Attachments" tab is located in the same area. To refine your search within any product category, the "REFINE BY" filter system is positioned on the left side of the screen on desktops and at the top of the page on mobiles, ensuring a seamless browsing experience.