LED-Driver 300W Premium Series 24V IP67 Constant Voltage
LED Driver 300W/24V IP67
Suitable for LED Strips
Input: 175~264V AC (50Hz)
Output: 24V / 12.50 Amps
Constant Voltage Type
5 Years Warranty
300W - 24 Volts Premium Series constant voltage LED driver with high power factor & efficiency.
This is a highly specified switch mode power supply using the best electronic components in the market.
Non-Dimmable LED Driver suitable for LED Strips of total power consumption up to 300W.
It is recommended to calculate 20% more than the tape power consumption.
LED Driver 300W/24V Suitable for LED Strips
Input: 175~264V AC (50Hz)
Output: 24V / 12.5 Amps
Rating: IP67 (Waterproof)
Power factor: >0.95
Efficiency: >90%
Ripple: <2%
Dimensions: L260*W86*H23.5mm
Weight: 1.25Kg
SELV, CE & RoHS certified
Warranty offered for premium series of LED drivers is 5 Years
___________________________
Note that LED strips dimming is possible if this driver is used in combination with an LED controller. In such case LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.
For driving RGB or RGBW LED Strips, you will have to combine the Driver with an RGB-RGBW LED Controller.
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
____________________________
The table below shows the maximum LED strip length, which can be operated with this LED driver.
To consider the best power supply performance, 20% was deducted from the maximum strip length in the table below.
____________________________
For more information about the installation of LED Strips, you can download the below PDF file: “Installation of LED Strips”.
- Voltage
- 24V DC
- Power
- 300 W
- Rating
- IP67 (Waterproof)
- Type
- non-dimmable
- Voltage Type
- Constant Voltage
- Warranty
- 5 Years
- Brand
- Hi-Line