LED Driver 600W 24V IP67 Premium Series

600 Watt 24 Volts Premium Series constant voltage LED driver with high power factor & efficiency.

This is a highly specified switch mode power supply using the best electronic components in the market.

Non-dimmable LED Driver suitable for LED Strips of total power consumption up to 600W.

It is recommended to calculate 20% more than the tape power consumption.

LED Driver 400W/24V Suitable for LED Strips

Input: 85~265V AC (50/60Hz)

Output: 24V/25Amps

Rating: IP67 (Waterproof) 

Power factor: >0.98

Efficiency: 92%

Ripple: <2%

Dimensions: L263*W123*H56mm

Weight: 2.806Kg

SELV, CE & RoHS certified

Warranty offered for the LED driver is 5 years

___________________________

Note that LED strips dimming is possible if this driver is used in combination with an LED controller. In such case LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.

For driving RGB or RGBW LED Strips, you will have to combine the Driver with an RGB-RGBW LED Controller.

___________________________

IMPORTANT NOTICE!

This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.

____________________________

For more information about the installation of LED Strips, you can download the below PDF file: “Installation of LED Strips”.