This 240W DALI LED driver has now been discontinued. For new installations or replacements, the recommended setup is to use an external DALI controller together with a higher-capacity IP67 power supply.
How to set it up: Install the 4-in-1 controller between the power supply and the LED load, then connect your DALI bus to the controller. The 400W IP67 driver supplies power only; all dimming and DALI control is handled by the controller. This provides a reliable and future-proof alternative to the discontinued 240W DALI driver.
Can also be used with smart home controllers as a part of a home automation to dim LED strip Lighting or other constant voltage LED products through a DALI gateway.
Characteristics:
Control: DALI
Input Voltage: 85~265V AC
Output Voltage: 24 Volts DC (PWM), 240W 10A
Dimensions: 287*97*51mm
IP Rating: IP67
Weight: 2.266Kg
Warranty: 5 Years
Certified: UKCA, CE
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
