Mains Dimmable LED Driver
24V PWM Output
30 Watt / 1250mA
Non Waterproof (IP20)
Warranty: 3 Years
43 Item Items
Same Day Dispatch
Warning: Last items in stock!
|Voltage Type||Constant Voltage|
This Mains dimmable LED driver operates with trailing edge phase cut dimmers and can be used to dimming 24 Volts LED strips, controlled by normal dimmer switches powered by 240V AC.
It can operate with load ranging from 50% to 100% and the dimming range will be from 5% to 100%.
It is suggested to load this driver with at least 15 Watt (maximum 30W) and use suitable trailing edge dimmer with minimum rated operating wattage that matches your LED strip load.
We do offer the following wattages concerning mains dimmable LED drivers: 12W/20W/30W/60W/100W/150W/200W.
The reason that we offer a variety of wattages is that dimmable Led drivers (mains dimmable 240V) should be matched with LED strip load and is important that LED strip power consumption to be between 50 to 100% of the dimmable driver capacity.
The Hi-Line, low wattage, mains dimmable drivers are compatible with trailing edge dimmers. We have tested the Varilight V-Pro (VL JQP401W) dimmer and it works smoothly (without any flickering) with our low wattage mains dimmable drivers (12W, 20W, 30W, 60W).
(We do suggest to test the dimmers on-site, before installing)
Input Voltage: 240V AC – (Dimmable)
Output Voltage: 24V DC (PWM/Dimmer) 30W/1250mA
Loading ranging: Stepless from 50% to 100%.
Dimming range: Stepless from 5% to 100%.
Power factor: >0.95
IP Rating: IP20
Dimensions: (LxBxH): 135x47x24mm
3 Years Warranty
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
The table below shows the minimum-maximum LED strip length, which can operate with this mains dimmable LED Driver.
No customer reviews for the moment.