Dimmable LED Driver | 24V | 60W | Hybrid Series (Triac or 0/1-10V)
Key features:
- New model. Indoor hybrid dimmable LED driver, IP20
- Leading edge and trailing edge, plus 0-10 V, 1-10 V, 10 V PWM and a resistor
- 24 V DC constant voltage, 60 W, 2.5 A
- Dims from 0.1% to 100%
- 3 year warranty
This is the new model of our 24 V, 60 W indoor hybrid driver. It is a constant-voltage supply for LED modules, in a slim IP20 case with push-fit terminals.
It dims from a mains wall dimmer on both leading-edge and trailing-edge circuits, and it also accepts 0-10 V, 1-10 V, 10 V PWM and a resistor. Hi-Line is confident it works with almost all mains dimmers of that kind. A test on the module you have is what confirms the match. If you are unsure, email us the dimmer details before you install.
Allow about 20% headroom above the LED load, and keep the load within 60 W.
The side of the driver is marked as follows:
- Input: 176-264 V AC, 50/60 Hz, 0.65 A
- Output: 24 V DC, 2.5 A, 60 W maximum
- Dimming: 0.1% to 100%
- Ambient temperature up to 45 °C, case temperature up to 90 °C
- SELV, IP20, for indoor use. For LED modules only
Size: 170 x 37.5 x 26.8 mm. Weight: about 200 g. Efficiency: 88% typical.
3 year warranty
Important. This driver should be installed by a qualified electrician in accordance with the current IET Wiring Regulations and any applicable Building Regulations.
Looking for more? After you choose a category, use the filters to narrow the list. On the product page, the attachments, specifications and related products carry the rest of the detail.
- Brand
- Hi-Line
- Mains Dimming
- Leading Edge Dimmers
- Power
- 60 W
- IP Rating
- IP20 (Non-waterproof)
- Type
- 0-10V and 1-10V DIM
Hybrid Dimming (Mains & 0-10V)
mains-dimmable - Voltage
- 24V DC
- Voltage Type
- Standard Type
- Warranty
- 3 Years