DMX RGBW LED Controller
1 RJ45 Port output
700mA / 150W
12 Item Items
Same Day Dispatch
Warning: Last items in stock!
Availability date: 21/12/18
|Type of control||DMX512|
|Voltage Type||Constant current|
DMX512 RGBW 4 Channels LED controller 700mA 150 Watt
To be used with our 12 Watt high power constant current MR16 RGBW constant current 700mA LED module
Input Voltage: 240V AC / 50 Hz
Output: 48Volts, 700mA (constant current)
Control protocol: DMX512
Every DMX Led controller has 1 X RJ45 output and you may connect up to 10 RGBW MR16 LED modules. Every controller is mains powered (100~240V AC) and comes with a built-in LED driver of 700mA at 48 Volts DC (no extra drivers are necessary).
For installations of more than 10 modules extra LED controllers are necessary to be purchased accordingly. The LED controllers are wall mounted and are compatible with standard DMX512 signal, meaning that you may configure the system to work with any “smart home controller” or any device that is in compliance with DMX lighting protocol. If you plan using longer network cable other than the supplied standard 2 meters length (2 meters between T-Boxes) then voltage drop has to be estimated and less RGBW modules should be connected to every controller accordingly.
Concerning control of the final installation, you can program all RGBW modules to respond to commands by a Lutron smart home system (using the extra Lutron DMX interface) or any other smart controller of your choice.
If you prefer to control the RGBW modules just by an iphone or ipad it is also possible as many applications in the market are made that are compatible with DMX signal that our wall mount LED controllers can accept as input (such as Nicolaudie Sunlite “stick” or similar).
We are always more than happy to offer further assistance for selecting the proper control mode for any project.
No customer reviews for the moment.