Optic Lens profile extrusion 30° | L1000mm | W19.5mm | H16mm
Key Features:
- Optic Lens Extrusion 30°
- For LED strips up to 17mm wide
- Size: L1000*W19.5*H16mm
Optic Lens profile Extrusion 1m, including 30° (Lens) cover and 2 end caps. Can fit up to 17mm width LED strips, product dimensions L1000*W19.5*H16mm
NOTE: It is best advised to install the lens diffuser by sliding it into the aluminium profile. Attempting to clip it on from the front may result in fracturing the lens. Please measure, cut to length if needed and test thoroughly.
Included in the Kit:
1 x 1m LED strip profile extrusion
1 x Optic Lens cover 30°(clear)
2 x end caps (1 with hole + 1 with no hole.)
Size: L1000*W19.5*H16mm
Strips: Fits up to 17mm wide LED strip
Installation method: Wall - surface mounting
Beam Angle: 30 degrees (Optic Lens)
IP Rating: IP20
Cuttable: Hacksaw
Optional accessories: Mounting clips
Material: Aluminium with pc diffuser
Warranty: 3 years
- Brand
- Hi-Line
- LED Profile Type
- Optic Lens
- LED Profile Length
- 1m
- Max. Width of LED Tape
- Up to 17mm
- Warranty
- 3 Years