ZigBee single colour LED strip dimmer - works with Philips Hue Bridge V2, and Amazon Alexa Echo plus
Key Features:
- ZigBee Light Link (ZigBee 3.0)
- ZigBee single colour LED strip controller
- Works with Amazon Alexa Echo plus, Samsung SmartThings, and Philips hue bridge V2
ZigBee Single colour LED strip controller - works with Philips Hue Bridge V2, Samsung SmartThings and Amazon Alexa Echo plus. Can also be integrated into Alexa-enabled Sonos products such as the Sonos Beam and Sonos One. These require a Zigbee hub device for pairing.
This LED strip controller can be used directly with Amazon Alexa echo plus that comes with built-in smart home hub. If any other Amazon Alexa device is used you will need additional smart hub such us Philips hue or any other brand. Can also be used as a standalone multizone system with Hi-Line's single colour ZigBee 4 zones remote before or after joining any ZigBee network.
Can also work directly with Philips hue, can be detected as a hue device and setup it up using Philips hue app.
Professional quality ZigBee (ZLL) single colour constant voltage LED strip controller.
Supports touchlink commissioning adopted in the latest specifications ZigBee 3.0 to facilitate an easy integration of new lighting devices into a ZigBee network.
Can operate with wide input voltage from 12 to 36 Volts DC in order to match operating voltage of LED strips. 4 outputs are available maximum of 5 Amps each. Note that all 4 outputs operate simultaneously in a single zone configuration.
1 zone / 4 outputs (used for splitting LED strip load), maximum load per channel is 5 Amps.
2 output channels can be bridged resulting in 1 x 10A output as per example below.
Warning: Bridging all 4 outputs will damage the controller, maximum bridging allowed is 2 x 2 channels (2 x 10A).
- Brand
- Hi-Line
- IP Rating
- IP20 (Non-waterproof)
- Voltage
- 12-36V DC
- Voltage Type
- Constant Voltage
- Type of control
- Radio Frequency (RF)
ZigBee Light Link - Warranty
- 5 Years