This listing is the 10 metre roll — reference HL-RGBNW-896COB-IP00-24V-10M.
Also available as a 5 metre roll. The same RGB+Natural White 4000K COB strip is sold as a 5 m reel — HL-RGBNW-896COB-IP00-24V. Open that page, or scroll to Related Products below. The two lengths are separate products, so the size in your basket is always clear.
What you are buying
A premium Hi-Line COB (chip-on-board) RGBW LED strip for colour-changing and high-quality white light in one continuous 10 m tape. The white channel is natural white 4000K (RGB+NW), so you get proper architectural white plus full RGB colour, with a smooth, dot-free finish suitable for coves, retail, hospitality, film set accents and high-end DIY projects.
Key technical specifications (see also the Product Specifications tab)
- Type: COB / COF RGBW (RGB + Natural White)
- CCT / colour: RGB + 4000K NW
- Density: 896 LEDs per metre (dotless appearance)
- Power: 15 W per metre
- Voltage: 24V DC constant voltage
- CRI: more than 90
- PCB width: 12 mm (use matching 5-pin / 4-channel COB RGBW connectors)
- IP rating: IP00 - indoor / dry locations (not waterproof)
- Cut points: about every 62.5 mm
- Roll length on this page: 10 metres
- Warranty: 3 years
For installers and engineers
- Load: budget about 15 W x metres (plus ~20% PSU headroom). Example: full 10 m roll ~150 W continuous strip load; size 24V drivers accordingly (often split feeds or multiple PSUs on longer jobs).
- Power injection: on a 10 m reel, plan injection / zone splits so voltage drop does not dull the far end or shift colour. Do not treat 10 m as a single un-fed spur unless your design calculations support it.
- Wiring: RGBW needs four channels + common (5-core). Keep polarity consistent (R/G/B/W + V+).
- Profiles: 12 mm COB tape in aluminium profile with diffuser for professional, even results.
- Controllers: constant-voltage RGBW (4-channel) at 24V. Match total channel current to the load of each zone.
For DIY and simple projects
This is the longer reel of the same strip as our 5 m listing - useful when you want fewer joins on a longer run. Still cut only on marked lines, use a suitable 24V supply and an RGBW controller, and prefer an aluminium channel for heat and appearance. If you only need half that length, consider the 5 m product instead.
How to control this strip
Wireless (most popular for homes, shops and multi-zone RF): scroll to Related Products below for matching Hi-Line wireless options - including popular 5-in-1 WiFi/RF controllers such as HL-WT5 and HL-V5-L(WT), waterproof RF receiver HL-V4-WPS, remotes such as HL-R8, HL-R8-1, HL-RS4 and HL-RS10-RGBCCT, wall panels such as HL-T14, and automation options like HL-EH-M(WZ). Pick the controller, then the remote or app that suits the install.
Pro wired DMX512: for venues, stages and fixed wired systems we stock a large DMX512 range here: DMX512 LED controllers collection.
Related products and accessories
Use Related Products below for the 5m sibling roll, COB RGBW connectors, and recommended controllers/remotes. Use Product Specifications for the full data list, and Attachments for guides where available.
