Can be cut at every 6 LEDs (5cm), Width of the LED strip is 10mm.
24 Volts DC, waterproof (IP54/65) LED strip powered by SMD3528 LED chip, 120LEDs/m, 9.6W/m, 5 meter roll, colour: red
The quality of this product is superior!
IP65 Waterproof Protection (IP54/65 = Splashproof) is achieved with polyurethane and silicon, which is the most expensive and best method that can be used on LED strips. This waterproof protection is very durable and does not become "yellowish", as happens with most LED strips within 3 months of installation. Moreover, the LED strip remains extremely flexible, very clear, soft and well-protected throughout its life time and can keep its IP54/65 rating for more than 5 years, if installed using an aluminium LED profile (to run at lower temperatures). Please not: IP00 rated LED strips are recommended wherever an IP54/65 rating is not required (e.g. indoor spaces) as these are easier to handle and install.
All our LED strips are dimmable. Please select a suitable PWM LED dimmer/controller. The LED strip cannot be dimmed in any other way!
Fitted with an easy to install original 3M adhesive tape with excellent adhesion (identified by a red protective strip on the adhesive side).
______________________________
Please note that soldering is recommended for the connection of LED strips. However, if a solder free connection is preferred, Hi-Line’s solder free connectors offer the best solution currently available on the market.
______________________________
Our price is for 1 x 5 meters roll (600 LEDS) single colour LED Strip (Red) - IP54/65 Waterproof
______________________________
Selection of the LED driver depending on the maximum LED strip length
The table below shows the maximum LED strip length, which can be operated with a given LED driver.
To consider performance drop, which occurs in the power supply cable, and to consider the efficiency of the LED Driver, 20% is deducted from the maximum strip length in the table below.
Note that LED strip dimming is possible if the driver is used in combination with an LED controller. In such a case, the LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.
____________________________
For more information about the installation of LED Strips, you can download the above PDF file: “Installation of LED Strips”.
