S-Type (Bendable) 4000K White LED Strip – Commercial High Grade – CRI 90+ – 5m Roll
Bendable S-Type LED strip in Natural White 4000K, designed for smooth sideways flexing and tight curves where standard LED strips cannot be used. Powered at 24V DC with 60 LEDs per metre and a light output of approximately 1320 lm/m. The 14.4W per metre high-CRI LED chips (Ra 90+) provide accurate natural-white illumination. Supplied as a 5-metre roll on an 8mm flexible circuit board, IP00 (non-waterproof). Ideal for sign makers, lettering, display work, and cove lighting. Comes with a 5-year warranty.
This commercial high grade bendable LED strip is designed for installations that require both high colour accuracy and full flexibility in routing. Built on an 8mm flexible circuit platform, the strip can bend sideways, follow smooth curves, and change direction cleanly where standard straight LED strips cannot. The bendable S-Type design allows the strip to flex sideways, follow curves, and change direction smoothly, making it suitable for illuminated signage, channel letters, curved architectural details, decorative contours, display lighting, panel work, and any installation where a standard straight LED strip cannot follow the required shape.
This high-CRI version uses upgraded SMD2835 chips engineered for superior colour rendering, achieving a typical CRI of approximately Ra 93. The 4000K natural white output delivers clean, accurate colour performance with improved realism, making it ideal for commercial, retail, or display areas where true-to-life colour representation is required. The strip provides approximately 1380 lumens per metre with an efficiency greater than 90 lm/W.
The strip can be cut every 6 LEDs (10cm). Each 5m roll is supplied with a 15cm wire on both ends, allowing it to be divided into separate shorter lengths without soldering. Original 3M adhesive backing ensures a secure and straightforward installation. All Hi-Line LED strips are fully dimmable when paired with a suitable PWM LED controller.
A single strip length must not exceed 5 metres when powered from one end. For longer installations, each section must be powered directly from the driver or controller using a suitable cable to avoid voltage drop and overheating. Installation hints and tips can be downloaded from the Attachments tab.
Hi-Line solder-free connectors are available for customers who prefer not to solder, although soldering remains the recommended method for maximum reliability.
The stated price is for one 5-metre roll of bendable Natural White high-CRI LED strip (300 × SMD2835 LEDs, IP00, 24V DC).
Technical Specifications
Input Voltage: 24V DC
Power Consumption: 14.4W per metre
Colour Temperature: 4000K Natural White
LED Chip Type: High CRI SMD2835
LED Density: 60 LEDs per metre
Brightness: approx. 1380 lm/m
Efficiency: > 90 lm/W
CRI: Ra > 90 (typically around 93)
Cutting Interval: Every 6 LEDs (10cm)
Strip Width: 8mm FCP
Ingress Protection: IP00 (non-waterproof)
Adhesive Backing: Original 3M
Maximum Single Run: 5 metres
Dimmable: Yes (PWM controller required)
Warranty Information
Standard Warranty: 3 Years
Extended Warranty: Any coverage beyond 3 years is considered Extended Warranty and is only valid with an official Hi-Line certificate. Extended cover is a paid upgrade and is granted only after Hi-Line engineers assess the full project design, installation conditions, environment, and installer credentials. In selected approved cases, total cover may be extended up to 7 years.
Important Installation Notes
All installations must follow the guidelines provided in the Attachments tab. A qualified installer must ensure correct cable sizing, voltage drop calculations, and power feed arrangements. If a run exceeds or approaches 5 metres, it should be powered from both ends or divided into shorter, individually powered segments. Hi-Line Lighting supplies components only and does not provide installation consultancy. All work must comply with IEE regulations. Incorrect installation, undersized cabling, or miscalculated loads can cause overheating or fire risk.
Looking for Related Products or Accessories? Discover compatible products and accessories by clicking the "Related Products" tab at the top of this product description on desktop, or just after this section on mobile devices. For detailed specifications, the "Product Specification" tab is also available at the top of this description. If you need technical data or installation guides, the "Attachments" tab is located in the same area. To refine your search within any product category, the "REFINE BY" filter system is positioned on the left side of the screen on desktops and at the top of the page on mobiles, ensuring a seamless browsing experience.
- Brand
- Hi-Line
- Brightness
- 1320 lm/m
- CIE Colour Space
- 3 SDCM
- Colour
- Natural White
- Colour rendering (CRI in ra)
- more than 90
- Colour Temperature (CCT)
- 4000K
- Cutting length
- Every 6 LEDs (100mm)
- FCP copper content
- 2 ounce double layer
- LEDs per meter
- 60 (SMD)
- LED Chip
- SMD 2835
- LED Strip Efficiency
- 92 lm/w
- LED Strip Length
- 5 metres roll
- Power
- 14.4 Watts per Metre
- IP Rating
- IP00 (Non-waterproof)
- Voltage
- 24V DC
- Voltage Type
- Standard Type
- Warranty
- 5 Years
- Width of strip
- 8mm
- LED Strip Type
- Bendable LED Strip