Your cart
There are no more items in your cart
LED strip lights provide a versatile and efficient lighting solution, ideal for both residential and commercial use. Available in single colour, RGB, RGBW, and tunable white (CCT) options, they offer precision lighting with excellent colour consistency and high efficiency. With durable PCB construction, flexible installation, and options ranging from indoor to fully waterproof IP68-rated strips, our collection ensures long-lasting performance. Whether for ambient, accent, or task lighting, explore our premium and value-series LED strips to find the perfect fit for your project.
How to mount an IP67 or IP68 silicone-sleeve LED strip
Why the factory tape lets go of a silicone sleeve, and how to mount the strip with DOWSIL 7091. Peel the liner first. Seal the ends with the 45 g tube. Use clips on a long, wet or overhead run.
Read moreWhere to cut an IP68 LED strip
The silicone jacket hides the cut marks. Hold the strip to a good light and cut only on the copper pads. A cut between the pads leaves a short dark end, shorter than one cut section.
Read moreJoin a tunable white LED strip to Alexa with Zigbee
The Zigbee CCT controller does not use the Wi-Fi router. An Echo with a Zigbee radio, such as an Echo Plus, finds it after five presses of RESET NET. Name the light, then save warm and cool as routines.
Read moreCommon anode current on colour-changing LED strip
The watts per metre on an RGB, RGBW, tunable-white or RGB+CCT strip are the total for every channel together. The black common anode carries that whole current. Connector length and feeder size are set by that one wire.
Read moreWall-switch pixel lighting for a 10 m ceiling — a simple DIY case study
A 10 m WS2811 ceiling that fills from one end and stays on from a 240 V wall switch, using a ready-programmed PIR SPI controller. The same puck also works as a simple PIR stair light with a hold time. Parts: 10 m tape, 100 W IP67 driver, or indoor IP20 EC.
Read moreCommon-core current, connectors and voltage drop on 3- to 6-core LED ribbon
Connectors are not universal: poles, 24/22/20 AWG and strip width all have to match. On 3- to 6-core CCT, RGB, RGBW and RGB+CCT tape the shared positive carries the whole load. Size that common core, the voltage drop and the driver from all channels on — and put those figures on the drawing.
Read moreHow to size a 24V driver for RGBW PWM lighting
The labelled watts on RGBW PWM lamps and strips are nominal. All four channels on, especially once warm, is the real load. 20% spare is the minimum; around 50% is what we use on this type of ceiling install. Worked example: the 6W MR16 spotlight.
Read moreHow to Cut and Connect IP67 Waterproof LED Strip
Commercial IP67 LED strip is not DIY clip tape. Use the two factory tails on each 5 m roll, cut only on the marks, seal ends with 12 mm silicone caps, and solder only extra power joins.
Read more14m 30mm Ultra-Bright COB LED Strip (40W/m) – Mains Dimming with Independent 5m Sections
How to install a 14 metre 30mm ultra-bright COB LED strip at 40W per metre with mains dimming. Three electrically independent sections (5m + 5m + 4m) that look like one line, using one 300W hybrid driver and one HL-S1-A booster per section.
Read moreIP68 LED Strip Installation in Wet & Humid Environments – Steam Room Corner & Ceiling Profile Setup
A practical case study showing how to install IP68 RGBW LED strips in wet areas, including steam rooms and saunas, with tips for making waterproof corners without soldering.
Read more