No 3M tape. This silicone sleeve is supplied without double-sided adhesive. A bare reel is not a missing part. Installers often want 3M because it is quick to fit. On this cover, acrylic tape sticks to the wall and lets go of the silicone, which is why the reel is supplied this way. If a red liner is still on the reel, peel it off. It is not the mount, and glue on that liner does not fix it. Mount the sleeve with DOWSIL 7091, white, 310 ml. The 45 g tube HL-706TM only seals a cut end and its cap. The steps, and when a clip should carry the run, are in how to mount an IP67 or IP68 silicone sleeve.
The silicone jacket hides the cut marks. Hold the strip to a good light and cut only on the copper pads. The spacing on this reel, and what a cut between the pads does, is in our guide to cutting an IP68 LED strip.
Introducing the "IP68 COB Neon LED Strip", now available in a 10-meter roll. This enhanced LED strip features 528 LEDs per meter, providing a continuous and uniform illumination. With a colour temperature of 4000K and a high Colour Rendering Index (CRI) of over 90, it ensures natural and accurate colour representation. The strip's IP68 rating makes it fully waterproof, ideal for outdoor and submerged applications. Operating at 24V, it's designed for energy efficiency and longevity. Its flexibility and extended length make it suitable for a wide range of lighting projects.
Cutting points are visible on the strip as darker copper lines, which are easier to spot when held up to the light. No 3M tape is fitted on the back, so the cut marks are easier to see. Any old liner can be peeled off. Use the note at the top of this page as a guide. Cuts must always be made straight across at 90° on the marked line. Cutting in the wrong place will only affect that section, not the full strip, though a short piece may remain unlit if not cut precisely. Always switch the strip off before cutting, as cutting while powered can damage the entire length. After cutting, reseal with the correct end cap and silicone to maintain IP68 protection.
Roll Length Options & Related Products
Available Lengths and Variants: This premium LED strip is available in 5m and 10m rolls to suit various project sizes. We offer a diverse range of colour temperatures including warm white, natural white, and cool white, as well as adjustable CCT and RGBW options.
How to Find: On desktop, refine your search by using the filter on the left side of the page. On mobile, the 'Refine By' option can be found at the bottom of the product page.
Related Products: For compatible accessories and related items, be sure to check the 'Related Products' tab.
Customisation and Pre-Order Options
Contact us if you'd like the LED strip customised for your specific project. Pre-orders are also available.
All Hi-Line IP68-rated LED strips are ideal for steam rooms and saunas, ensuring that LED drivers and controllers are placed in a separate location to maintain their integrity and performance.
The distinct advantage of our LED strips in such environments comes from our exclusive coating, which not only provides IP68 protection but also acts as a cooling agent, allowing these strips to withstand temperatures up to 110 degrees Celsius. This makes them exceptionally suited for high-temperature conditions and extreme environments. For optimal durability and efficiency in saunas and steam rooms, we advise installing the IP68 LED strips onto aluminium flat bars, LED profiles, or directly onto concrete walls, which aids in additional cooling and enhances the lifespan and luminance retention of the LED chips.
We encourage customers to review our Returns and Warranty Guide for comprehensive details regarding warranty coverage for our products when used under these specific conditions.
Premium COB LED Chips – High Brightness Version
This product uses Hi-Line Premium COB LED chips, designed to deliver higher brightness and improved efficiency compared to standard COB LED strips.
Although many LED strips may state 528 LEDs per metre, actual performance depends on the quality of the LED chips and internal components. Hi-Line uses selected high-grade COB technology, which is why this version operates at 15W per metre with very strong light output.
We also offer the same Premium specification at 10W per metre, using the same high-quality chips but with reduced brightness for applications where lower light output is preferred.
In addition, Hi-Line offers a Value Series version (528 LEDs per metre, 10W per metre). This is a more economical option using different materials and components, while still maintaining a professional standard. Value Series products are always clearly identified in their descriptions.
This product refers to the Premium high-brightness version.
15 W per metre on this listing is the most a short length can draw. A full reel measures less. How we state watts per metre.
Other Lengths and Accessories
By clicking the Related Products tab, customers can locate:
5 metre versions are supplied without 3M tape
10 metre versions are supplied without 3M tape
Additional stainless steel fixing clips
Matching connectors
Silicone end caps for resealing after cutting
When LED strips are cut, end caps may be required to maintain the IP68 protection, depending on the installation.
Warranty
Standard Warranty: 3 Years (extendable up to 7 Years subject to approval)
Extended Warranty:
Extended warranty options of up to 7 Years are available subject to project review and approval by Hi-Line engineers. Extended cover is a paid upgrade and is granted only after evaluation of the installation design, environment, and application.
