Mains Dimmable LED Driver 24V 12W IP20
This Mains dimmable LED driver operates with trailing edge phase cut dimmers and can be used to dimming 24 Volts LED strips, controlled by normal dimmer switches powered by 240V AC.
It can operate with load ranging from 50% to 100% and the dimming range will be from 5% to 100%.
______________________________
It is suggested to load this driver with at least 6 Watt (maximum 12W) and use suitable trailing edge dimmer with minimum rated operating wattage that matches your LED strip load.
We do offer the following wattages concerning mains dimmable LED drivers: 12W/20W/30W/60W/100W/150W/200W.
The reason that we offer a variety of wattages is because dimmable Led drivers (mains dimmable 240V) should be matched with LED strip load and is important that LED strip power consumption to be between 50 to 100% of the dimmable driver capacity.
The specific mains dimmable driver (HL-DIM-CV-12W-24V) operate smother using trailing edge dimmers.
(We do suggest to test the dimmers on-site, before installing)
Input Voltage: 240V AC – (Dimmable)
Output Voltage: 24V DC (PWM/Dimmer) 12W/500mA
Loading ranging: Stepless from 50% to 100%.
Dimming range: Stepless from 5% to 100%.
Power factor: >0.9
Efficiency: >85%
IP Rating: IP20
Dimensions: (LxBxH): 94x36x17mm
Weight: 100g
3 Years Warranty
Selection of the LED Driver depending on the minimum-maximum LED strip length
The table below shows the minimum-maximum LED strip length, which can operate with this mains dimmable LED Driver.
