Mains Dimmable LED Driver 24V 60W IP67 Premium Series
60 Watt 24Volts dimmable LED drivers operate smoother using trailing edge phase cut dimmers and can be used to dimming 24 Volts LED strips, controlled by normal dimmer switches powered by 240V AC.
It can operate with load ranging from 50% to 100% and the dimming range will be from 5% to 100%.
It is suggested to load this driver with at least 30 Watt (maximum 60W) and use suitable trailing edge dimmer with minimum rated operating wattage that matches your LED strip load.
We do offer the following wattages concerning mains dimmable LED drivers: 12W/20W/30W/60W/100W/150W/200W.
The reason that we offer variety of wattages is because dimmable Led drivers (mains dimmable 240V) should be matched with LED strip load and is important that LED strip power consumption to be between 50 to 100% of the dimmable driver capacity.
This dimmable driver can operate smoother with trailing edge dimmers.
(We do suggest to test the dimmers on-site, before installing)
Input Voltage: 240V AC – (Dimmable)
Output Voltage: 24V DC (PWM/Dimmer) 60W/2,5A
Loading range: 50% to 100%.
Dimming range: 5% to 100%.
Power factor: >0.95
Efficiency: >85%
IP Rating: IP67
Dimensions: (LxWxH): 163x56x35mm
Weight: 550g
5 Years Warranty
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
Selection of the LED Driver depending on the minimum-maximum LED strip length
The table below shows the minimum-maximum LED strip length, which can operate with this mains dimmable LED Driver.
Looking for Related Products or Accessories?
Click the 'Related Products' tab below the product description to find compatible LED strips, drivers, and accessories. For technical data or installation guides, check out the 'Attachment' tab for available PDFs. To refine your search further, use our "REFINE BY" filter system available when browsing any product category.
