Dimmable LED Driver 24V 30W IP67 Premium Series
Hi-Line's 30 Watt dimmable LED drivers operate smoother using trailing edge phase cut dimmers and can be used to dimming 24 Volts LED strips, controlled by normal dimmer switches powered by 240V AC.
It can operate with load ranging from 50% to 100% and the dimming range will be from 5% to 100%.
It is suggested to load this driver with at least 15 Watt (maximum 30W) and use suitable trailing edge dimmer with minimum rated operating wattage that matches your LED strip load.
We do offer the following wattages concerning mains dimmable LED drivers: 12W/20W/30W/60W/100W/150W/200W.
The reason that we offer a variety of wattages is because dimmable Led drivers (mains dimmable 240V) should be matched with LED strip load and is important that LED strip power consumption to be between 50 to 100% of the dimmable driver capacity.
This dimmable driver can operate with both trailing and leading edge dimmers.
(We do suggest to test the dimmers on-site, before installing)
Input Voltage: 240V AC – (Dimmable)
Output Voltage: 24V DC (PWM/Dimmer) 30W/1250mA
Loading ranging: 50% to 100%.
Dimming range: 5% to 100%.
Power factor: >0.95
Efficiency: >85%
IP Rating: IP67
Dimensions: (L/W/H): 140x56x35mm
Weight: 500g
5 Years Warranty
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
Selection of the LED Driver depending on the minimum-maximum LED strip length
