New products

24v-40w-dimmable-power-supply-led-strips

24v-40w-dimmable-power-supply-led-strips 2

MAINS - DIMMABLE

24V 40W Dimmable Power Supply for LED Strips (Constant Voltage)

Compact 24V 40W constant voltage LED driver with Triac & Push-Dim dimming. Perfect for LED strips, offering smooth 0–100% dimming and stable output.

Out of Stock

STRIP TO POWER CONNECTOR

Set of 5 – 12mm COB RGB + Tunable White 6-Pin Strip-to-Wire Connector, IP00/IP20

Hi-Line Lighting

HL-COBRGBTW6-IP00-C

£4.50

Set of 5 connectors for 12mm COB RGB + Tunable White LED strips with 6-pin connection. Supplied without wire. Must be used with 22AWG 6-core flat ribbon cable (Ref: HL-RGBCCT-AWG22-10M). Recommended for Hi-Line COB strips only.

View

hl-rgbcct-awg22-10m-6-core-ribbon-cable 2

Next working day delivery

6 CORE CABLE

22AWG Flat 6 core ribbon RGB+CCT LED cable 10 metre roll

Hi-Line Lighting

HL-RGBCCT-AWG22-10M

£13.50

6 core ribbon cable, 22AWG / 0.35mm², 11mm wide, 10 metre roll

v1-s-mains-led-dimmer-interface-for-led-strips

v1-s-mains-led-dimmer-interface-for-led-strips 2

Next working day delivery

SINGLE COLOUR CONTROLLERS

Mains Wall Dimmer LED Interface 12–48VDC, 15A

HL-V1-S

£30.00

Control large LED strip installations with standard or smart mains wall dimmers. Converts leading-edge, trailing-edge or push-dim signals into PWM for 12–48VDC strips, up to 15A. Requires an external constant voltage PSU with the same voltage as the LED strips, rated at least 1.2× above the load.

Next working day delivery

LED LIGHTING SOLUTIONS

5m Roll Pixel LED Strip 12V RGBW 84LEDs/m 28 Pixels/m Black PCB IP00

Hi-Line Lighting

HL-P28-84-RGBWW-2814-B-12V

£40.00

5m roll pixel addressable RGBW LED strip, 12V, 84 LEDs/m, 28 pixels/m, black PCB, cuttable every 3.5cm. Uses SK2814 external ICs for 4-channel independent control (RGBW). Supplied with connectors and power injection wires.

12v-addressable-rgbw-led-strip-60-pixels-per-metre

12v-addressable-rgbw-led-strip-60-pixels-per-metre 2

Next working day delivery

LED LIGHTING SOLUTIONS

12V Addressable RGBW LED Strip – 60 Pixels/m, SK6812, 10mm, 3000K White, 5m Roll

Hi-Line Lighting

HL-P60-RGBW-6812-12V

£60.00

12V Addressable RGBW LED strip with 60 pixels/m, SK6812 4-in-1 LEDs, RGB + 3000K warm white, 10mm PCB, cut per 1 LED, 5m roll with 3M tape and 15cm leads on both ends. Power Consumption: 24.5 W/m (when all RGB and White channels are at full brightness)

surge-current-protector-for-led-drivers 2

Next working day delivery

LED CONTROLLERS

Surge Current Suppressor for Dimmable LED Drivers and Lamps S1-SX

HL-S1-SX

£21.50

The HL-S1-SX surge inrush current suppressor prevents nuisance breaker tripping and protects dimmers, drivers, and dimmable lamps from high inrush current. Suitable for GU10s, 240V dimmable lamps, and mains dimmable LED drivers. Compact, easy to install, and ideal for reliable lighting performance.

Next working day delivery

LED DRIVERS

Mains Dimming Constant Voltage LED Driver 24V 150W – TF-150-24

Hi-Line Lighting

HL-TF-150-24

£55.40

24V 150W mains dimming constant voltage LED driver for single colour LED strips. Works with Triac dimmers or a 240V Push to Make switch, which sends only a control signal while the driver handles the load. If using a wireless RF controller or 24V wall dimmer panel, a non-dimmable driver is sufficient, but this dimmable type is also compatible.

10mm-universal-led-strip-connector-cob-smd

10mm-universal-led-strip-connector-cob-smd 2

Next working day delivery

STRIP TO POWER CONNECTOR

Universal LED Strip Connector Kit – COB & SMD – 10 mm

Hi-Line Lighting

HL-COB-CON-UNI-10

£0.90

Solder-free connector for 10 mm COB and HD SMD LED strips (180–240 LEDs/m). Supports multiple joins, corner feeds, and mid-run power injection to reduce voltage drop.

Next working day delivery

STRIP TO POWER CONNECTOR

Universal LED Strip Connector Kit – COB & SMD – 8 mm

Hi-Line Lighting

HL-COB-CON-UNI-8

£0.90

Solder-free connector for 8 mm COB and HD SMD LED strips (180–240 LEDs/m). Supports multiple joins, corner feeds, and mid-run power injection to reduce voltage drop.

Next working day delivery

LED SIGNAGE

5 Volts WS2811 Addressable RGB LED Pixel Module – 50pcs Pack, Waterproof, 12mm

Hi-Line Lighting

HL-WS2811-RGB-50-5V

£18.00

Digital RGB LED pixel modules, 5V input, 12mm diameter, IP65 waterproof, WS2811 IC – supplied as a 50-piece pack for addressable lighting projects.

Next working day delivery

SINGLE COLOUR CONTROLLERS

TS-K(WT) WiFi Triac Rotary Dimmer – Smart Control for Dimmable LED Lighting

HL-TS-K(WT)

£35.00

TS-K(WT) is a rotary dimmer with WiFi and smart app control. It supports 240V dimmable LED lamps like GU10 or low-voltage LED strips using a Triac mains-dimmable driver. Works manually or with Tuya, Alexa, and Google Assistant. Smooth 0–100% dimming with leading or trailing edge mode.

Showing 13-24 of 27 item(s)

Slim wall LED profile extrusion L2000mm | W17mm | H8.5mm

LED strip profile | L2000mm | W17mm | H15mm

Adjustable Aluminium Plaster-In LED Profile - 2 meters

5 core RGBW LED cable 10 metre roll 20AWG

3M Core Series Double Sided Adhesive Tape 33m roll 8mm

8mm Single colour LED strip power connector with 15cm cable (pack of 5)

Strip to strip connector for 12mm IP65 LED tape RGBW 5 pin (pack of 5)

New products

24V 40W Dimmable Power Supply for LED Strips (Constant Voltage)

Set of 5 – 12mm COB RGB + Tunable White 6-Pin Strip-to-Wire Connector, IP00/IP20

22AWG Flat 6 core ribbon RGB+CCT LED cable 10 metre roll

Mains Wall Dimmer LED Interface 12–48VDC, 15A

5m Roll Pixel LED Strip 12V RGBW 84LEDs/m 28 Pixels/m Black PCB IP00

12V Addressable RGBW LED Strip – 60 Pixels/m, SK6812, 10mm, 3000K White, 5m Roll

Surge Current Suppressor for Dimmable LED Drivers and Lamps S1-SX

Mains Dimming Constant Voltage LED Driver 24V 150W – TF-150-24

Universal LED Strip Connector Kit – COB & SMD – 10 mm

Universal LED Strip Connector Kit – COB & SMD – 8 mm

5 Volts WS2811 Addressable RGB LED Pixel Module – 50pcs Pack, Waterproof, 12mm

TS-K(WT) WiFi Triac Rotary Dimmer – Smart Control for Dimmable LED Lighting

Blog