Blue colour, high bright
24 Volts DC, 14.4W per meter
5 meter roll (8mm)
3 years warranty
24 Item Items
Same Day Dispatch
Warning: Last items in stock!
|LED Chip||SMD 2835|
|Number of LEDs per meter||60|
|Width of strip||8mm|
|Cutting length||Every 6 LEDs (100mm)|
|LED Strip Packing||5-meter roll|
|Voltage Type||Constant Voltage|
Blue 24V high grade LED Strip powered by SMD2835 LED chip, 14.4W per meter, 5 meters roll non-waterproof
The LED strip is 8mm wide and 3mm high. It can be cut at every 6 LEDs (10cm).
Non-Waterproof IP00, 24 Volts constant voltage blue ultra high bright LED strip SMD2835 Chip, 60 LEDs / 14.4W per meter, 5 meter roll with 3 years warranty.
This is an ultra high brightness LED strip, powered by Epistar SMD2835 LED chips.
Great for sign makers, cove lighting or any application that high brightness LED is necessary.
For longer life it is suggested to be installed on an aluminum bar for proper cooling.
All our LED strips are dimmable. Please select a suitable PWM LED dimmer/controller. The LED strip cannot be dimmed in any other way!
Please note that soldering is recommended for the connection of LED strips. However, if a solder free connection is preferred, Hi-Line’s solder free connectors offer the best solution currently available on the market.
Price is for a 5 meter roll (300 LEDs), Non-Waterproof (IP00)
The table below shows the maximum LED strip length, which can be operated with a given LED driver.
To consider the performance drop, which occurs in the power supply cable and the efficiency of the LED Driver, 20% were deducted from the maximum strip length in the table below.
Note that LED strips dimming is possible if the driver is used in combination with an LED controller. In such case LED driver is not required to be dimmable and brightness control (dimming) is still possible through the LED controller.
For more information about the installation of LED Strips, you can download the above PDF file: “Installation of LED Strips”.
No customer reviews for the moment.