IP67 Natural White LED Strip 24V 14.4W/m
Natural White LED strip, 4000K, 24V, IP67 (Waterproof)
60 LEDs/m–14.4W/m–1380 Lm/m
5m roll–10mm width (5mm height)
High CRI - Ra>80
3 year warranty
IP67 Natural White 4000K LED Strip 24V, powered by 60 SMD2835 LED chips per meter, 14.4W/m, CRI80, 5m roll, with 3M red 4100 core series tape
14.4 w/m – 24V DC – 5m roll – 60 LEDs/m – IP67 (Waterproof) – 2-wire cable (15cm on each side of the strip roll)
______________________________
The high quality of Hi-Line LED strips ensures low decay, which increases the LED strip's lifespan and assures that a high level of the brightness is kept constant throughout the LED strip's life.
Please do NOT connect more than 10 meters of LED tape in series. An LED strip of more than 10 meters in length will overload, due to the increased amount of current passing through, resulting in the damage of the PCB and the failure of the LED strip. Thus, when 10 meters of LED strip is exceeded, it is suggested to connect both ends of the strip directly to the LED controller or driver using 2-core cable.
______________________________
The LED strip comes with a 15cm wire ending on each side of the strip roll. Therefore, no extra soldering is required if the roll should be cut into 2 different pieces (i.e. 3 meters + 2 meters).
Please note that soldering is recommended for the connection of LED strips; solder-free connectors are not available for IP67 rated LED strips.
All Hi-Line LED strips are dimmable. Please select a suitable PWM LED dimmer/controller to ensure the proper dimming of the LED strip.
- CIE Colour Space
- 3 SDCM
- Voltage
- 24V DC
- Colour
- Natural White
- Power
- 14.4 W/m
- Brightness
- 1380 lm/m
- Number of LEDs per meter
- 60
- LED Strip Efficiency
- 96 lm/w
- Rating
- IP67 (Waterproof)
- Colour Temperature (CCT)
- 4000K
- Colour rendering (CRI in ra)
- 80
- Width of strip
- 10mm
- Width of PCB
- 8mm
- Cutting length
- Every 6 LEDs (100mm)
- Warranty
- 3 Years
- Brand
- Hi-Line
- LED Chip
- SMD 2835