New Next working day delivery Mains - Dimmable S1-F Single-Line AC Triac RF Push Dimmer 100-240V HL-S1-F £29.00 HL-S1-F is a single-line mains AC triac dimmer: switched live in, switched live out, plus a retractive push. RF 2.4 GHz remotes are optional. 1.5 A / 150–360 W. Not a 12/24 V strip dimmer, and not the two-wire S1-B. Add to basket
New Next working day delivery LED Remote Controls R1 10-Key RF Dimming Remote 1-Zone Black HL-R1-B £21.00 HL-R1-B is the black 10-key handheld 1-zone dimming remote. It talks 2.4 GHz RF to a matching Hi-Line single-colour dimmer. On/off, brightness shortcuts, night light and two scenes. CR2032, wall holder in the box. Not a dimmer on its own. Add to basket
New Last items in stock Single Colour Controllers ES32-V PIR Sensor Stair Light Controller 32CH 5-24V HL-ES32-V £128.00 HL-ES32-V is a 32-channel constant-voltage stair-light controller with two PIR heads and a daylight sensor in the box. 5–24 V, 1 A per step. Walk on at the top or bottom and the treads sequence on. OLED, six run modes. Single-colour strip only — not the SPI RGB ES32. Add to basket
New Last items in stock LED Strip Cable 22 AWG 2 Core Red/Black LED Strip Cable 10 Metre Roll HL-2C-AWG22-10M £9.00 HL-2C-AWG22-10M is a 10 m roll of 22 AWG 2-core red/black LED-strip cable. Use it for single-colour tape (plus and 0 V). 22 AWG (0.35 mm²) for solderless clips that will not take 20 AWG. Sister of the thicker 20 AWG 2-core roll. Not a controller. Add to basket
New Next working day delivery 4 CORE CABLE 22 AWG 4 Core RGB LED Strip Cable 10 Metre Roll HL-RGB-AWG22-10M £13.00 HL-RGB-AWG22-10M is a 10 m roll of 22 AWG 4-core RGB LED-strip cable. Use it for RGB tape (common anode plus R, G, B). 22 AWG (0.35 mm²) for clips that will not take 20 AWG. Sister of the thicker 20 AWG 4-core roll. Not a controller. Add to basket
New Next working day delivery DMX512 LED Controllers DA-L-RDM DMX RDM Signal Amplifier 12-48V 2-Out HL-DA-L-RDM £52.00 HL-DA-L-RDM is a 12–48 V DMX512 and RDM signal amplifier: one isolated input, two isolated outputs. It regenerates a long or heavily loaded DMX/RDM line and keeps RDM talking both ways. Not a decoder and not the 4-way mains splitter HL-DMX512S-4. Add to basket
New Last items in stock DMX512 LED Controllers DA-RDM DIN-Rail DMX RDM Signal Amplifier 12-48V 2-Out HL-DA-RDM £58.00 HL-DA-RDM is a DIN-rail 12–48 V DMX512 and RDM amplifier: one isolated input, two isolated outputs. Same job as HL-DA-L-RDM, in a DIN housing (white or black). Not a decoder and not the 4-way HL-DMA-RDM. Add to basket
New Last items in stock DMX512 LED Controllers DMA-RDM 4-Way DMX RDM Signal Splitter 12-48V HL-DMA-RDM £132.00 HL-DMA-RDM is a 12–48 V four-way DMX512 and RDM splitter: one isolated input, DMX thru, four isolated outputs. Screw terminals and 3-pin XLR. Not the two-out DIN HL-DA-RDM, and not the mains 4-way HL-DMX512S-4. Add to basket
New Next working day delivery Mains - Dimmable S1-S 2A AC Inrush Suppressor for Triac LED 100-240V HL-S1-S £12.00 HL-S1-S is a 100–240 V AC inrush suppressor for triac-dimmed LED loads. Max 2 A / 480 W. Wire it in series with the dimmer (L in / L out) so GU10s and small drivers do not trip the breaker. Not a dimmer. The 8 A version is HL-S1-SX. Add to basket
New Next working day delivery Single Colour Controllers V1-C 12-24V 20A 3-Button RF LED Strip Dimmer HL-V1-C £24.00 The Hi-Line HL-V1-C is a 12–24 V DC, 20 A three-button + RF dimmer for single-colour LED strip. Brightness up / on-off / brightness down on the box, optional 2.4 GHz remotes, and an external push switch. PWM 500 Hz–16 kHz. Not 36/48 V — that is HL-V1-L or HL-V1-K. See the attached PDF for DIP settings and wiring. Add to basket
New Next working day delivery COB LED Strips Amber / Orange COB LED Strip 24V 5m IP00 604 nm HL-COB-AMBER-IP00-24V-5M £30.00 The Hi-Line HL-COB-AMBER-IP00-24V-5M is a 5 m, 24 V amber / orange COB LED strip (604 nm). 8 mm open PCB, IP00 indoor. Dotless amber line for bars, joinery and display. To the eye there are no dots and no dead spots. A photograph can still show the chips as small dots. Add to basket
New Next working day delivery COB LED Strips Amber / Orange COB LED Strip 24V 5m IP67 604 nm HL-COB-AMBER-IP67-24V-5M £38.00 No 3M tape. This silicone sleeve is supplied without double-sided adhesive. A bare reel is not a missing part. How to mount it. The Hi-Line HL-COB-AMBER-IP67-24V-5M is a 5 m, 24 V amber / orange COB LED strip (604 nm) in a silicone tube. IP67 splash and wet-area use. Same colour as the indoor IP00 reel. Not a neon extrusion. Outside width... Add to basket