Dimmable LED Driver 150W 24V Hybrid Series (Triac or 0/1-10V) IP20
Hybrid Dimmable LED Driver IP20
Works with Triac dimmer switches, 0-10V or potentiometer
24V DC Output
150 Watt / 24V
Warranty: 3 Years
IP20 non waterproof Hybrid dimmable 150 Watt 24V LED driver operates perfectly with leading edge phase cut dimmers (referred also as Triac dimmers) and can be used to dimming 24 Volts LED strips, controlled by standard wall dimmer switch powered by 240V AC or 0/1-10 Volts dimming systems.
It can operate with load ranging from 5% to 100% and the dimming range will be from less then 3% to 100%.
It is suggested to load this driver with at least 7.5 Watt (maximum 150W) and use standard leading edge (Triac) dimmer with wattage that can handle LED strip load requirements.
The hybrid models work perfectly with any leading-edge dimmers.
If you have a dimmer switch in mind and are unsure about compatibility, please email us for assistance.
We also tested this dimmable driver with Lutron smart home products and it is compatible.
Input Voltage: 170~264V AC – (Dimmable)
Output Voltage: 24V DC (150W)
Loading range: 5% to 100%.
Dimming range: 3% to 100%.
IP Rating: IP20
Dimensions: (LxWxH): 181x64x30mm
3 Years Warranty
This device should be installed by a qualified electrician in accordance with the latest edition of the IEE Wiring Regulations and any applicable Building Regulations.
- 24V DC
- Mains Dimming
- Leading Edge Dimmers
- 150 W
- IP20 (Non-waterproof)
- Hybrid Dimmable (Mains or 0/1-10V)
- Voltage Type
- Constant Voltage
- 3 Years