List of products by brand Hi-Line Lighting

3 cores Red/White/Yellow LED strip wire AWG 20, 6m roll 3 cores Red/White/Yellow LED strip wire AWG 20, 6m roll 2
Next working day delivery
LED Strip Cable

3 Core Cable for Single Colour and Tunable LED Strips – 10 Metre Roll – 20 AWG

Hi-Line Lighting
HL-3C-AWG20-10M
£14.00
3-core flat ribbon cable, 20 AWG (0.50 mm²), supplied as a 10 metre roll for single-colour and tunable white LED strip work. This is the thicker of our two 3-core rolls. Confirm that any connector will actually accept 20 AWG, and check voltage drop for the length and load. On a 3-wire CCT strip the common core carries the full load, not just one colour...
300W 24V constant voltage LED Driver with DIP switches for adjustable pre-set brightness control 300W 24V constant voltage LED Driver with DIP switches for adjustable pre-set brightness control 2
Next working day delivery
DIP Switch Adjustable

300W LED Driver | 24V | IP20 | constant voltage (Adjustable-Brightness)

Hi-Line Lighting
HL-300W-24V-IP20-EC
£40.00
The HL-300W-24V-IP20-EC Adjustable LED Driver is your go-to solution for reliable and efficient indoor lighting. With programmable 24V output functions via DIP switch, this 300W, 24V unit is as versatile as it is robust. Experience smooth soft-start lighting with 4 preset brightness levels, all wrapped up in a silicone-potted casing for extended...
D4-P 4-Channel-DMX-LED-Decoder-RJ45-Ports D4-P 4-Channel-DMX-LED-Decoder-RJ45-Ports 2
Next working day delivery
DMX512 LED Controllers

4 Channel 8A*4CH PWM Constant Voltage DMX & RDM LED Decoder Controller (D4-P)

Hi-Line Lighting
HL-D4-P
£40.00
The D4-P DMX512 & RDM decoder supports 4 channels at 8A each, with input voltages ranging from 12V to 36V DC. It features a digital display for easy configuration, adjustable PWM frequency (250Hz to 16,000Hz), and RDM communication for direct DMX setup. The self-test mode allows you to test each channel individually without needing a DMX connection,...
dmx512-splitter-4-way dmx512-splitter-4-way 2
Last items in stock
DMX512 LED Controllers

4-Way DMX512 Signal Splitter with Isolated Outputs – 1 In / 4 Out

Hi-Line Lighting
HL-DMX512S-4
£80.00
Professional 4-way DMX512 splitter with one input and four fully isolated outputs. Supports up to 32 fixtures per output and up to 16 splitters in sequence. Regenerates and stabilises the DMX signal for long or complex installations. Requires 120-ohm termination at the last fixture. Universal AC100–240V input; power cable supplied (no UK plug).
Showing 121-144 of 790 item(s)