List of products by brand Hi-Line Lighting

3 cores Red/White/Yellow LED strip wire AWG 20, 6m roll 3 cores Red/White/Yellow LED strip wire AWG 20, 6m roll 2
Next working day delivery
LED Strip Cable

3 Core Cable for Single Colour and Tunable LED Strips – 10 Metre Roll – 20 AWG

Hi-Line Lighting
HL-3C-AWG20-10M
£14.00
3-core flat ribbon cable, 20 AWG (0.50 mm²), supplied as a 10 metre roll for single-colour and tunable white LED strip work. This is the thicker of our two 3-core rolls. Confirm that any connector will actually accept 20 AWG, and check voltage drop for the length and load. On a 3-wire CCT strip the common core carries the full load, not just one colour...
300W 24V constant voltage LED Driver with DIP switches for adjustable pre-set brightness control 300W 24V constant voltage LED Driver with DIP switches for adjustable pre-set brightness control 2
Next working day delivery
DIP Switch Adjustable

300W LED Driver | 24V | IP20 | constant voltage (Adjustable-Brightness)

Hi-Line Lighting
HL-300W-24V-IP20-EC
£40.00
The HL-300W-24V-IP20-EC Adjustable LED Driver is your go-to solution for reliable and efficient indoor lighting. With programmable 24V output functions via DIP switch, this 300W, 24V unit is as versatile as it is robust. Experience smooth soft-start lighting with 4 preset brightness levels, all wrapped up in a silicone-potted casing for extended...
D4-P 4-Channel-DMX-LED-Decoder-RJ45-Ports D4-P 4-Channel-DMX-LED-Decoder-RJ45-Ports 2
Next working day delivery
DMX512 LED Controllers

4 Channel 8A*4CH PWM Constant Voltage DMX & RDM LED Decoder Controller (D4-P)

Hi-Line Lighting
HL-D4-P
£40.00
The D4-P DMX512 & RDM decoder supports 4 channels at 8A each, with input voltages ranging from 12V to 36V DC. It features a digital display for easy configuration, adjustable PWM frequency (250Hz to 16,000Hz), and RDM communication for direct DMX setup. The self-test mode allows you to test each channel individually without needing a DMX connection,...
Showing 121-140 of 790 item(s)