New Next working day delivery 4 CORE CABLE 22 AWG 4 Core RGB LED Strip Cable 10 Metre Roll HL-RGB-AWG22-10M £13.00 HL-RGB-AWG22-10M is a 10 m roll of 22 AWG 4-core RGB LED-strip cable. Use it for RGB tape (common anode plus R, G, B). 22 AWG (0.35 mm²) for clips that will not take 20 AWG. Sister of the thicker 20 AWG 4-core roll. Not a controller. Add to basket
New Next working day delivery DMX512 LED Controllers DA-L-RDM DMX RDM Signal Amplifier 12-48V 2-Out HL-DA-L-RDM £52.00 HL-DA-L-RDM is a 12–48 V DMX512 and RDM signal amplifier: one isolated input, two isolated outputs. It regenerates a long or heavily loaded DMX/RDM line and keeps RDM talking both ways. Not a decoder and not the 4-way mains splitter HL-DMX512S-4. Add to basket
New Last items in stock DMX512 LED Controllers DA-RDM DIN-Rail DMX RDM Signal Amplifier 12-48V 2-Out HL-DA-RDM £58.00 HL-DA-RDM is a DIN-rail 12–48 V DMX512 and RDM amplifier: one isolated input, two isolated outputs. Same job as HL-DA-L-RDM, in a DIN housing (white or black). Not a decoder and not the 4-way HL-DMA-RDM. Add to basket
New Last items in stock DMX512 LED Controllers DMA-RDM 4-Way DMX RDM Signal Splitter 12-48V HL-DMA-RDM £132.00 HL-DMA-RDM is a 12–48 V four-way DMX512 and RDM splitter: one isolated input, DMX thru, four isolated outputs. Screw terminals and 3-pin XLR. Not the two-out DIN HL-DA-RDM, and not the mains 4-way HL-DMX512S-4. Add to basket
New Next working day delivery Mains - Dimmable S1-S 2A AC Inrush Suppressor for Triac LED 100-240V HL-S1-S £12.00 HL-S1-S is a 100–240 V AC inrush suppressor for triac-dimmed LED loads. Max 2 A / 480 W. Wire it in series with the dimmer (L in / L out) so GU10s and small drivers do not trip the breaker. Not a dimmer. The 8 A version is HL-S1-SX. Add to basket
New Next working day delivery Single Colour Controllers V1-C 12-24V 20A 3-Button RF LED Strip Dimmer HL-V1-C £24.00 The Hi-Line HL-V1-C is a 12–24 V DC, 20 A three-button + RF dimmer for single-colour LED strip. Brightness up / on-off / brightness down on the box, optional 2.4 GHz remotes, and an external push switch. PWM 500 Hz–16 kHz. Not 36/48 V — that is HL-V1-L or HL-V1-K. See the attached PDF for DIP settings and wiring. Add to basket
New Next working day delivery COB LED Strips Amber / Orange COB LED Strip 24V 5m IP00 604 nm HL-COB-AMBER-IP00-24V-5M £30.00 The Hi-Line HL-COB-AMBER-IP00-24V-5M is a 5 m, 24 V amber / orange COB LED strip (604 nm). 8 mm open PCB, IP00 indoor. Dotless amber line for bars, joinery and display. To the eye there are no dots and no dead spots. A photograph can still show the chips as small dots. Add to basket
New Next working day delivery COB LED Strips Amber / Orange COB LED Strip 24V 5m IP67 604 nm HL-COB-AMBER-IP67-24V-5M £38.00 No 3M tape. This silicone sleeve is supplied without double-sided adhesive. A bare reel is not a missing part. How to mount it. The Hi-Line HL-COB-AMBER-IP67-24V-5M is a 5 m, 24 V amber / orange COB LED strip (604 nm) in a silicone tube. IP67 splash and wet-area use. Same colour as the indoor IP00 reel. Not a neon extrusion. Outside width... Add to basket
New Next working day delivery LED Strip Fixing Clips 8 mm LED Strip Mounting Clip | U-Channel | Single Screw | Pack of 10 HL-FC8-U-IP00 £2.50 U-channel mounting clip with a centre screw hole for 8 mm LED tape, COB and slim neon. Pack of 10. Screws not included. Add to basket
New Next working day delivery LED Strip Fixing Clips 12 mm LED Strip Mounting Clip | U-Channel | Single Screw | Pack of 10 HL-FC12-U-IP00 £2.50 U-channel mounting clip with a centre screw hole for 12 mm LED tape, COB and slim neon. Pack of 10. Screws not included. Add to basket
New Next working day delivery LED Strip Fixing Clips 15 mm LED Strip Mounting Clip | U-Channel | Single Screw | Pack of 10 HL-FC15-U-IP00 £2.50 U-channel mounting clip with a centre screw hole for 15 mm LED tape, COB and slim neon. Pack of 10. Screws not included. Add to basket
New Next working day delivery RGB & RGBW LED Modules 24V 6W MR16 RGBW LED Spotlight – SPI WS2814 Pixel (50mm) HL-RGBWW-SPI-24V-6W £25.00 24V 6W 50 mm RGBW spotlight with a WS2814 pixel chip and 3-pin SPI tails. Sold each. This is not the 5-wire PWM model — it needs a dedicated SPI controller such as HL-WT-SPI. Add to basket
New Next working day delivery RGB & RGBW LED Modules 24V 12W MR16 RGBW LED Spotlight – SPI WS2814 Pixel (50mm) HL-RGBWW-SPI-24V-12W £30.00 24V 12W 50 mm RGBW spotlight with a WS2814 pixel chip and 3-pin SPI tails. Sold each. Taller body than the 6W. This is not the 5-wire PWM model — it needs a dedicated SPI controller such as HL-WT-SPI. Add to basket
New Next working day delivery SPI LED Controllers PIR SPI Pixel Controller for WS2811 Tape HL-PIR-SPI £25.00 Small indoor PIR controller for WS2811 pixel tape. Use a wall switch, or the built-in motion sensor. Built-in scenes including a fill from first pixel to last, then hold. 5–24 V, up to 2048 pixels. No app. Add to basket
New Next working day delivery Lighting Effect Luminaires 12mm 0.2W Mini Recessed LED Spot 24V Warm White IP68 HL-D12-24V-WW-IP68 £19.00 12 mm 0.2 W recessed mini LED spot, 24 V warm white, IP68. 8 mm cut-out. Stainless finish. For decks, steps and paths. Sold as a single fitting. Add to basket
New Next working day delivery Lighting Effect Luminaires 26mm Curved Handrail LED Spot 24V Warm White 3000K IP67 HL-HR26-24V-WW-IP67 £23.00 The stainless face is curved so the fitting sits flush on a round handrail. 26 mm cut-out, 24 V warm white 3000K, IP67, 1 W. Sold as a single fitting. Add to basket
New Next working day delivery Lighting Effect Luminaires 26mm Curved Handrail LED Spot 24V RGB IP67 HL-HR26-24V-RGB-IP67 £26.00 The stainless face is curved so the fitting sits flush on a round handrail. 26 mm cut-out, 24 V analogue RGB, IP67, 1 W. Use a 24 V 3-channel PWM RGB controller. Sold as a single fitting. Add to basket
New Last items in stock LED Remote Controls RT7 4-Zone Touch Wheel Colour Temperature Remote, Black HL-RT7 £23.00 Black handheld remote for tunable white LED strips. The touch wheel sets colour temperature across four zones. Two AAA batteries and a wall holder are in the box. It pairs with Hi-Line 2.4 GHz colour-temperature receivers. It is not a dimmer on its own. Add to basket
New Next working day delivery LED Remote Controls RT10 4-Zone Touch Wheel RGB and CCT Remote, Black HL-RT10 £23.00 Black 4-zone handheld remote for RGB with tunable white. Touch wheel, two AAA batteries and a wall holder. Pair it with a Hi-Line 5-in-1 RGB+CCT receiver such as V5-L(WT), WT5 or WZ5. It is not a dimmer on its own. Add to basket
New BACKORDER LED Neon Flex 22 mm Pixel RGB LED Neon Flex | 12V | WS2811 | 3 m HL-RGB-D22-PIX-3M £150.00 22 mm braided 360° RGB pixel tube, 3 metres, 12 V, WS2811 32 pixels on the roll, 192 LEDs, 96 on each side 6 LEDs in each pixel. Cut only on the marked pixel point Braided sleeve takes the wear of handling and fitting About 40–45 W per metre with red, green and blue on. Allow about 135 W for this roll Made to order. Allow about 30 days Add to basket