Home

Next working day delivery

RGBW LED Strips

10m Roll RGB + Natural White LED Strip | 14.4W/m | 24V DC | IP68 Waterproof

No 3M tape. This silicone sleeve is supplied without double-sided adhesive. A bare reel is not a missing part. How to mount it. 10m RGB + Natural White LED strip with 14.4W/m power, 24V DC input and IP68 waterproof rating. Ideal for office lighting, modern interiors and clean task lighting.

black LED dimmer wall switch for single colour strips

black LED dimmer wall switch for single colour strips 2

Single Colour Controllers

Black T11 Glass Single Colour DMX & RF Touch Panel | 4-Zone Wall-Mounted Dimmer

HL-T11-B

£40.00

T11 black glass touch panel for single colour LED strips. Supports 4-zone control via RF wireless or DMX512. Wall-mounted dimmer with mains input and LED touch keys.

WS2811-12V-RGB-Pixel-Module-XConnect-50pcs

WS2811-12V-RGB-Pixel-Module-XConnect-50pcs 2

Next working day delivery

LED Signage

WS2811 12V RGB LED Pixel Modules 50pcs X-Connect Regulated IP68

HL-WS2811-RGB-50-12V

£33.00

12V WS2811 RGB addressable pixel string — 50 regulated nodes, 100 mm spacing, black 18AWG cable, 3-pin X-Connect in and out, IP68 sealed 12 mm bullets. Constant-current regulation holds brightness and colour even when voltage sags along the run. Control with Hi-Line WiFi SPI (HL-WT-SPI) or DMX-to-SPI (HL-DS-L / HL-DS-WP). Spare X-Connect tails:...

v4-wps-rf-led-controller-12-48v-constant-voltage

v4-wps-rf-led-controller-12-48v-constant-voltage 2

Next working day delivery

LED Controllers

V4-WPS – 4CH LED Strip Controller 12–48V RF Wireless, Constant Voltage, Waterproof

HL-V4-WPS

£55.00

Waterproof 4-channel LED controller for RGB, RGBW, CCT or single colour LED strips. Supports 12–48V constant voltage and operates via 2.4GHz RF remote or wall panel. Compatible with up to 10 remotes. Flicker-free dimming across 4096 steps. Suitable for indoor and outdoor use. Matching remote or wall panel required – see the “Related Products” tab.

10m-natural-white-led-strip-4000k-24v-smd2835

10m-natural-white-led-strip-4000k-24v-smd2835 2

Next working day delivery

Single Colour LED Strips

10m Roll – High CRI Natural White LED Strip 4000K | 24V | 28.8W/m | Ultra Bright...

HL-LS2835HA-120NW-IP00-24V-10M

£84.00

10m LED strip roll in 4000K natural white. Ultra-bright 28.8W/m SMD2835. 120 LEDs/m. CRI90+ quality. 24V DC. IP00 non-waterproof. Not for single-end 10m powering.

warm-white-12v-cob-led-module-budget-ip67

warm-white-12v-cob-led-module-budget-ip67 2

BACKORDER

LED Back Lighting

Warm White (3000K) 12V COB LED Module – Budget Series – 20x IP67 Modules

HL-COB-SN001-WW

£12.00

Affordable 12V COB LED modules in warm white. Set of 20 waterproof IP67-rated units, suitable for signage and general-purpose lighting.

Next working day delivery

SPI LED Controllers

IP65 Waterproof & Wireless DMX512 to SPI Decoder 5-24V - DS-WP

HL-DS-WP

£55.00

Control addressable 5V or 12V LED strips with this IP65 waterproof DMX512 to SPI decoder. RF wireless support, digital display, and 32 dynamic modes. Model: DS-WP

Next working day delivery

Single Colour Controllers

TS-K(WT) WiFi Triac Rotary Dimmer – Smart Control for Dimmable LED Lighting

HL-TS-K(WT)

£40.00

TS-K(WT) is a rotary dimmer with WiFi and smart app control. It supports 240V dimmable LED lamps like GU10 or low-voltage LED strips using a Triac mains-dimmable driver. Works manually or with Tuya, Alexa, and Google Assistant. Smooth 0–100% dimming with leading or trailing edge mode.

-10%

LED Signage

5 Volts WS2811 Addressable RGB LED Pixel Module – 50pcs Pack, Waterproof, 12mm

HL-WS2811-RGB-50-5V

£27.00 £30.00

Digital RGB LED pixel modules, 5V input, 12mm diameter, IP65 waterproof, WS2811 IC – supplied as a 50-piece pack for addressable lighting projects.

Next working day delivery

Strip to Power Connector

Universal LED Strip Connector Kit – COB & SMD – 8 mm

HL-COB-CON-UNI-8

£1.00

Solder-free connector for 8 mm COB and HD SMD LED strips (180–240 LEDs/m). Supports multiple joins, corner feeds, and mid-run power injection to reduce voltage drop.

10mm-universal-led-strip-connector-cob-smd

10mm-universal-led-strip-connector-cob-smd 2

Next working day delivery

Strip to Power Connector

Universal LED Strip Connector Kit – COB & SMD – 10 mm

HL-COB-CON-UNI-10

£1.00

Solder-free connector for 10 mm COB and HD SMD LED strips (180–240 LEDs/m). Supports multiple joins, corner feeds, and mid-run power injection to reduce voltage drop.

Next working day delivery

LED Drivers

Mains Dimming Constant Voltage LED Driver 24V 150W – TF-150-24

HL-TF-150-24

£52.00

24V 150W mains dimming constant voltage LED driver for single colour LED strips. Works with Triac dimmers or a 240V Push to Make switch, which sends only a control signal while the driver handles the load. If using a wireless RF controller or 24V wall dimmer panel, a non-dimmable driver is sufficient, but this dimmable type is also compatible.

HL-V1-K 20A Rotary RF LED Strip Dimmer 12-48V Angle

Single Colour Controllers

V1-K 20A Rotary RF LED Strip Dimmer 12-48V

HL-V1-K

£33.00

HL-V1-K is a 12–48 V single-colour strip dimmer with a rotary knob and a numeric display. PWM is selectable (500 Hz, 2 kHz, 8 kHz or 16 kHz). 20 A at 12/24 V on 500 Hz. Optional 2.4 GHz remotes. Not the 8 A HL-V1-KS, and not the 0–10 V HL-V1-T.

surge-current-protector-for-led-drivers 2

Next working day delivery

LED Controllers

Surge Current Suppressor for Dimmable LED Drivers and Lamps S1-SX

HL-S1-SX

1 Reviews

£22.00

The HL-S1-SX surge inrush current suppressor prevents nuisance breaker tripping and protects dimmers, drivers, and dimmable lamps from high inrush current. Suitable for GU10s, 240V dimmable lamps, and mains dimmable LED drivers. Compact, easy to install, and ideal for reliable lighting performance.

12v-addressable-rgbw-led-strip-60-pixels-per-metre

12v-addressable-rgbw-led-strip-60-pixels-per-metre 2

BACKORDER

LED Lighting Solutions

12V Addressable RGBW LED Strip – 60 Pixels/m, SK6812, 10mm, 3000K White, 5m Roll

HL-P60-RGBW-6812-12V

£60.00

12V Addressable RGBW LED strip with 60 pixels/m, SK6812 4-in-1 LEDs, RGB + 3000K warm white, 10mm PCB, cut per 1 LED, 5m roll with 3M tape and 15cm leads on both ends. Power Consumption: 24.5 W/m (when all RGB and White channels are at full brightness) Black PCB. White PCB available to order — email us.

Next working day delivery

LED Lighting Solutions

5m Roll Pixel LED Strip 12V RGBW 84LEDs/m 28 Pixels/m Black PCB IP00

HL-P28-84-RGBWW-2814-B-12V

£39.00

5m roll pixel addressable RGBW LED strip, 12V, 84 LEDs/m, 28 pixels/m, black PCB, cuttable every 3.5cm. Uses WS2814 external ICs for 4-channel independent control (RGBW). Supplied with connectors and power injection wires.

phase-cut-dimming-extension-module-600w 2

Next working day delivery

Single Colour Controllers

Phase-Cut Dimming Extension Module for Large LED Loads

HL-S1-A

£36.50

This module extends the load capability of phase-cut dimming systems, allowing a standard leading or trailing edge dimmer to control much larger connected loads. It improves compatibility with dimmable LED lamps and triac-dimmable LED drivers, helping prevent overload, instability or dimmer damage when multiple drivers or high-wattage loads are used on...

v1-s-mains-led-dimmer-interface-for-led-strips

v1-s-mains-led-dimmer-interface-for-led-strips 2

Next working day delivery

Single Colour Controllers

Mains Wall Dimmer LED Interface 12–48VDC, 15A

HL-V1-S

£30.00

Control large LED strip installations with standard or smart mains wall dimmers. Converts leading-edge, trailing-edge or push-dim signals into PWM for 12–48VDC strips, up to 15A. Requires an external constant voltage PSU with the same voltage as the LED strips, rated at least 1.2× above the load.

hl-rgbcct-awg22-10m-6-core-ribbon-cable 2

Next working day delivery

6 Core Cable

22AWG Flat 6 core ribbon RGB+CCT LED cable 10 metre roll

HL-RGBCCT-AWG22-10M

£18.00

6-core RGB+CCT flat ribbon, 22 AWG (0.35 mm²), 11 mm wide, 10 metre roll. For soldering and for connectors that take 22 AWG. The 12 mm 6-pin COB strip-to-wire clip (HL-COBRGBTW6-STW-IP00) takes 24 AWG — this 22 AWG cable will not fit that housing.

24v-40w-dimmable-power-supply-led-strips

24v-40w-dimmable-power-supply-led-strips 2

Next working day delivery

Mains - Dimmable

24V 40W Dimmable Power Supply for LED Strips (Constant Voltage)

HL-TE-40-24

£27.00

Compact 24V 40W constant voltage LED driver with Triac & Push-Dim dimming. Perfect for LED strips, offering smooth 0–100% dimming and stable output.

50m-3-core-ribbon-cable-for-led-strips 2

BACKORDER

LED Strip Cable

50m Roll – 3 Core Ribbon Cable for Tunable LED Strips – 20AWG

HL-3C-AWG20-50M

£42.00

50m roll 3 core ribbon cable for tunable LED strips, 20AWG (0.50mm²), 5mm width. Suitable for single colour tunable installations.

10m-roll-cob-tunable-white-led-strip-640leds

10m-roll-cob-tunable-white-led-strip-640leds 2

BACKORDER

Tunable White LED Tape

10m Roll COB Dotless Tunable White LED Strip | CRI90+ | 640 LEDs/m | 24V | IP00

HL-COB640TW-R90-IP00-24V-10M

£90.00

10m COB Dotless Tunable White LED strip with 640 LEDs per metre (320 warm + 320 cool). Adjustable 2700K–6500K with CRI90+ for natural colour rendering. Consumes 15W per metre with ~800 lm/m per channel output. Parallel power feeds required every 5m to avoid voltage drop. Designed for aluminium profile installation for correct heat dissipation. IP00...

Next working day delivery

SPI LED Controllers

Dual Push Button SPI LED Controller for white or RGB Pixel addressable LED strips

HL-ES-DP(WT)

£35.00

Dual push button SPI controller for White and RGB pixel LED strips. Works with Tuya Smart APP, voice assistants, and supports stair or general pixel lighting effects. Smart SPI stair lighting controller for sequential step effects with push button control.

staircase motion sensor LED controller 2

SPI LED Controllers

Dual PIR Sensor and Push Button SPI Controller with Tuya Smart Control

HL-ES-D(WT)

£50.00

WiFi SPI controller with dual PIR sensors, daylight sensor, and push buttons included. For pixel addressable RGB or white LED strips only. Works with Tuya APP, Alexa, Google. Not for RGBW. SPI stair lighting controller with dual PIR sensors for automatic step lighting.

Showing 721-744 of 876 item(s)

Slim wall LED profile extrusion L2000mm | W17mm | H8.5mm

LED strip profile | L2000mm | W17mm | H15mm

2m Slim Recessed LED profile extrusion L2000mm | W23mm | H8.5mm

5 core RGBW LED cable 10 metre roll 20AWG

3M Core Series Double Sided Adhesive Tape 33m roll 8mm

8mm Single colour LED strip power connector with 15cm cable (pack of 5)

Strip to strip connector for 12mm IP65 LED tape RGBW 5 pin (pack of 5)

Home

10m Roll RGB + Natural White LED Strip | 14.4W/m | 24V DC | IP68 Waterproof

Black T11 Glass Single Colour DMX & RF Touch Panel | 4-Zone Wall-Mounted Dimmer

WS2811 12V RGB LED Pixel Modules 50pcs X-Connect Regulated IP68

V4-WPS – 4CH LED Strip Controller 12–48V RF Wireless, Constant Voltage, Waterproof

10m Roll – High CRI Natural White LED Strip 4000K | 24V | 28.8W/m | Ultra Bright...

Warm White (3000K) 12V COB LED Module – Budget Series – 20x IP67 Modules

IP65 Waterproof & Wireless DMX512 to SPI Decoder 5-24V - DS-WP

TS-K(WT) WiFi Triac Rotary Dimmer – Smart Control for Dimmable LED Lighting

5 Volts WS2811 Addressable RGB LED Pixel Module – 50pcs Pack, Waterproof, 12mm

Universal LED Strip Connector Kit – COB & SMD – 8 mm

Universal LED Strip Connector Kit – COB & SMD – 10 mm

Mains Dimming Constant Voltage LED Driver 24V 150W – TF-150-24

V1-K 20A Rotary RF LED Strip Dimmer 12-48V

Surge Current Suppressor for Dimmable LED Drivers and Lamps S1-SX

12V Addressable RGBW LED Strip – 60 Pixels/m, SK6812, 10mm, 3000K White, 5m Roll

5m Roll Pixel LED Strip 12V RGBW 84LEDs/m 28 Pixels/m Black PCB IP00

Phase-Cut Dimming Extension Module for Large LED Loads

Mains Wall Dimmer LED Interface 12–48VDC, 15A

22AWG Flat 6 core ribbon RGB+CCT LED cable 10 metre roll

24V 40W Dimmable Power Supply for LED Strips (Constant Voltage)

50m Roll – 3 Core Ribbon Cable for Tunable LED Strips – 20AWG

10m Roll COB Dotless Tunable White LED Strip | CRI90+ | 640 LEDs/m | 24V | IP00

Dual Push Button SPI LED Controller for white or RGB Pixel addressable LED strips

Dual PIR Sensor and Push Button SPI Controller with Tuya Smart Control

Blog